Magnetic tape recording: Materials
Materials it needs
The commodities and chemicals it needs per unit, its share of each one's demand and how critical each is
Needs- Iop Iron oxide pigments criticality low BASF replaced the first carbonyl iron coating with magnetite in 1936 and with gamma ferric oxide from 1939 [2].
- Cu Copper criticality medium The first data tape was plated phosphor bronze, a copper alloy [3]; the EU lists copper as a strategic raw material [8].
- PVC PVC criticality low Polyvinyl chloride became the preferred base film in the late 1930s [1].
- PET PET resin criticality low Polyester (Mylar) base films eventually replaced cellulose acetate [2].
as of 2026-11-11. No opened source gives material amounts per cartridge or per reel; criticality is the writer's judgement.
Critical materials
The materials whose supply could hold it back
- No material is likely to hold tape back: its coating is iron oxide and its base film polyester [2], both common industrial materials.
- Copper: the EU lists it as a strategic raw material [8]; the first data tape was plated phosphor bronze, a copper alloy [3], and heads and motors use copper wire.
as of 2026-11-11
Sources
- 1935: Audio recorder uses low-cost magnetic tape Computer History Museum, The Storage Engine
- A Selected History of Magnetic Recording Friedrich Engel and Peter Hammar, edited by Richard L. Hess (richardhess.com), 2006
- 1951: Tape unit developed for data storage Computer History Museum, The Storage Engine
- Study on the Critical Raw Materials for the EU 2023 European Commission, 2023