Mechanised spinning: Science
Principles
The science it rests on, with why each principle matters to it
Relies on- Newton's laws of motion Drafting works by friction and speed difference between roller pairs, and spindles turning many thousands of times a minute must be balanced against their own inertia.
as of 2026-11-10
The science explained
The science behind it explained for a curious reader
Yarn is many short fibres made to grip each other. Two things are needed: the fibres must be drawn out into a thin, even strand, and the strand must be twisted so that friction locks them together. A hand spinner does both with her fingers. The machine separates them. Drafting rollers do the drawing: if the front pair turns four times faster than the back pair, the strand coming out is four times thinner, because the fibres slide along each other. The spindle or rotor then does the twisting. Since rollers and spindles can be repeated along a frame and driven from one shaft, a machine can spin a hundred or a thousand threads at once [1].
as of 2026-11-10
Sources
- Edward Baines on the Mechanization of Spinning, 1835 (extract from History of the Cotton Manufacture in Great Britain) Edward Baines (1835), extract in a University of Massachusetts Dartmouth course reader