Material Insights · Understanding the Material World

Nylon (polyamide synthesis): Materials

Materials it needs

The commodities and chemicals it needs per unit, its share of each one's demand and how critical each is

Makes
  • PA Nylon (PA6, PA66) criticality low The process makes polyamide polymer for fibre and plastics; 7 million tonnes of fibre were made in 2024 [4].
Uses
  • CPL Caprolactam criticality low Caprolactam is the single monomer of nylon 6, the other main kind of nylon.
  • Bz Benzene criticality low Benzene from oil refining is the usual starting point for both the diacid and caprolactam.
  • HNO3 Nitric acid criticality low Adipic acid, the diacid of nylon 6,6, is made by oxidising a benzene derivative with nitric acid, a step that gives off nitrous oxide.
Needs
  • Oil Crude oil criticality low Nylon's building blocks come from petrochemicals; when nylon was developed the diamine was only a laboratory curiosity [1].

as of 2026-11-11. No source opened gives amounts per tonne of nylon; criticality is the writer's judgement, since all these chemicals are made at large scale.

Critical materials

The materials whose supply could hold it back

  • No raw material is likely to hold nylon back: its feedstocks are bulk petrochemicals made from oil and gas.
  • Recycled feedstock is scarce: recycled polyamide was only 2% of the polyamide market in 2024 [4], so supply still depends almost wholly on new petrochemicals.

as of 2026-11-11

Sources

  1. The Establishment of Modern Polymer Science: Wallace H. Carothers (National Historic Chemical Landmark) American Chemical Society, 2000
  2. Materials Market Report 2025 Textile Exchange, 2025