Material Insights · Understanding the Material World

Planar process and photolithography

Light through a mask patterns layers on a wafer, making many devices at once.

Making things · Microfabrication · No. 336

  • Electronic age
  • Readiness 9 of 9
  • Process
Making things · Technology

Chips are printed like photographs: light through a stencil, first used on silicon in the 1950s, now prints features about 13 nanometres wide.

Chart: Illustration: Planar process and photolithography

Where it comes from

Chart: Map of where it comes from

Bell Labs began adapting photoengraving to silicon in 1955, and an army laboratory patented photolithographic circuits in 1957. At Fairchild, Jean Hoerni's planar process of 1959 kept the oxide in place, and the first planar integrated circuit followed.

Three things to know
  1. In 1955 Jules Andrus and Walter Bond at Bell Labs began adapting printing's photoengraving methods to silicon wafers.
  2. Jean Hoerni's planar process kept the protective oxide on the wafer, and Fairchild sold the first planar transistor in April 1960.
  3. Light can only draw features down to about half its wavelength, which is why chipmakers moved to 13.5 nm extreme ultraviolet light.
The journey
  1. 1 WaferA polished slice of pure silicon
  2. 2 OxideA thin glassy layer of silicon dioxide is grown on top
  3. 3 ResistA light-sensitive coating is spread over the oxide
  4. 4 ExposureLight shines through a patterned mask onto the resist
  5. 5 EtchDeveloped resist protects some areas while others are etched or doped
  6. 6 RepeatDozens of layers are stacked to build complete circuits
Covered in Light, semiconductors and information: from the transistor to the networkEngineering
Go deeper pick a tab to open it in full