Pneumatic tyre: Science
Principles
The science it rests on, with why each principle matters to it
Relies on- Gas laws Compressed air acts as a spring: squeezing it into a smaller volume raises its pressure, as Boyle's law states [7], so the tyre pushes back against bumps.
- Hooke's law of elasticity The rubber and cords stretch and recover elastically under load, which keeps the tyre's shape and lets the sidewall flex.
as of 2026-11-10
Discoveries
The discoveries that made it possible: when, by whom and what was found
| Year | Who | What |
|---|---|---|
| 1662 | Robert Boyle | Shows that the volume of a gas varies inversely with its pressure [7] |
| 1678 | Robert Hooke | Publishes his law that the force of a spring is in proportion to its stretch [8] |
| 1839 | Charles Goodyear | Finds that heating rubber with sulphur changes it for good, the basis of vulcanised rubber [6] |
as of 2026-11-10
The science explained
The science behind it explained for a curious reader
Squeeze a closed bicycle pump and you feel the air push back harder the more you press. Boyle found the rule in 1662: halve the volume of a gas and its pressure doubles [7]. A tyre is a ring of that springy air, wrapped in rubber. When the wheel rolls over a stone, the tyre dents, the air inside is squeezed a little, and it pushes the casing back out. The vehicle's weight rests on the small flattened patch where the tyre touches the road, held up by the air pressure across that patch. The rubber itself must bend millions of times without cracking, which became possible only after Goodyear found how to toughen it with sulphur [6]. Each flex wastes a little energy as heat, which is why tyre design matters for fuel use [2].
as of 2026-11-10
Sources
- The triumph of the radial tyre Michelin UK newsroom, 2020
- Charles Goodyear (Scientist of the Day) Linda Hall Library, 2025
- Robert Boyle Science History Institute
- Introducing Laws of Physics American Institute of Physics