Material Insights · Understanding the Material World

Portland cement

Limestone and clay burnt to clinker and ground give a cement that sets hard with water.

Making materials · Ceramics, glass and cement · No. 12

  • Steam and steel
  • Readiness 9 of 9
  • Process
Making materials · Technology

The grey powder in every building site is made by burning rock at 1,450 °C, and causes about 5 to 8% of the world's CO2.

Chart: Illustration: Portland cement

Where it comes from

Chart: Map of where it comes from

Engineers learned from Smeaton in the 1750s that clayey limestone makes lime that sets under water. Joseph Aspdin patented Portland cement in 1824, and his son William's hotter-burnt clinker of 1843 made it strong.

Three things to know
  1. Joseph Aspdin's cement of the 1820s was not clinkered; his son William's clinkered cement of 1843 was almost twice as strong as standard cements.
  2. About 50 to 60% of cement's CO2 comes from the limestone itself as it is heated, not from the fuel.
  3. In the United States 63% of cement shipped in the first nine months of 2025 was blended, 95% of it portland-limestone cement.
The journey
  1. 1 QuarryLimestone and other minerals are dug and crushed
  2. 2 Raw mealThe rock is ground fine and blended to the right chemistry
  3. 3 KilnThe meal is heated to about 1,450 °C and fuses into clinker
  4. 4 GrindingClinker is ground with a little gypsum, often with limestone or slag added
  5. 5 ConcreteMixed with water, sand and gravel, the cement sets and hardens
Covered in Structures and materials: stress, stiffness, strength and why things breakEngineeringMatter at the atomic scale: bonds, reactions and process engineeringEngineering
Go deeper pick a tab to open it in full