Fired pottery: Science
Principles
The science it rests on, with why each principle matters to it
Relies on- Combustion chemistry Burning wood, coal or gas gives the heat that drives water out of clay and fuses its grains.
- Heat conduction (Fourier's law) Heat soaks slowly through a clay wall, so pieces must be dried and fired gently or the uneven expansion cracks them.
as of 2026-11-10
Discoveries
The discoveries that made it possible: when, by whom and what was found
| Year | Who | What |
|---|---|---|
| 1783 | Josiah Wedgwood | A clay-based device to measure the high temperatures reached in kilns, for which he was elected to the Royal Society [9] |
| 1876 | Hermann Seger | A study of plastic clays and kaolins showing that most of a clay's behaviour comes from its chemical make-up [8] |
| 1924 | Mineralogists describing rock from the Isle of Mull | Mullite, the needle-shaped crystal that forms when clay is fired and gives porcelain much of its strength [10] |
as of 2026-11-10
The science explained
The science behind it explained for a curious reader
Picture wet clay as a deck of tiny playing cards with a film of water between each card. The water lets the cards slide, so the clay can be squeezed into any shape. Drying removes most of that water, and the cards cling together, but add water and they slide again. Firing changes this for good. As the heat rises, the water locked inside the mineral grains is driven out and the grains themselves change, so the clay can never be softened again [4]. Hotter still, the edges of the cards begin to weld together. In stoneware and porcelain some of the material melts into glass, which flows into the gaps and sets as the kiln cools, leaving a dense body that water cannot pass through [3].
as of 2026-11-10
Sources
- Wikipedia: Pottery
- Pottery Encyclopaedia Britannica
- Hermann Seger Wikipedia
- Josiah Wedgwood Wikipedia
- Mullite Wikipedia