Railway (iron track network): Materials
Materials it needs
The commodities and chemicals it needs per unit, its share of each one's demand and how critical each is
Needs 5- St Steel criticality low Rails, wheels and many sleepers are steel; early rails were cast and wrought iron.
- Stn Crushed stone criticality low Track ballast is crushed stone that drains water and holds the sleepers in place.
- Tm Timber criticality low Timber sleepers were the norm and are still widely used.
- Cem Cement criticality low Concrete sleepers, bridges and slab track use cement.
- Cu Copper criticality medium Overhead wires and feeders on electrified lines, about 392,000 km of lines in UIC's survey, are copper [5].
as of 2026-11-10. No source gives material amounts per km of track. Criticality is a judgement: copper is marked medium because it is on critical or strategic lists such as the EU's; the rest are common.
Critical materials
The materials whose supply could hold it back
- Steel: rails need special high-strength grades, but steel is made in very large amounts worldwide, so supply is not a constraint.
- Copper: electrified lines need copper for overhead wires, and they make up about 392,000 km of the 930,000 km of lines in UIC's survey [5].
as of 2026-11-10
Sources
- Railway Statistics Synopsis, 2025 edition International Union of Railways (UIC), 2025