Material Insights · Understanding the Material World

Hydraulic concrete (pozzolanic): Science

Principles

The science it rests on, with why each principle matters to it

Relies on

as of 2026-11-10

Discoveries

The discoveries that made it possible: when, by whom and what was found

YearWhoWhat
1756John SmeatonExperiments on mortars showing that limestone with some clay in it, not pure hard limestone, gives a lime that sets under water [5]
1818Louis Vicat (and J. F. John, independently)Rules for the proportions of lime and clay that give a hydraulic lime of any chosen strength (about 1818, calculated) [5]
2017Marie Jackson and colleagues, University of UtahSea water reacting with Roman harbour concrete grows Al-tobermorite and phillipsite crystals that strengthen it [3]
2023Admir Masic and colleagues, MITHot mixing with quicklime leaves lime clasts that let Roman concrete heal its own cracks [2]

as of 2026-11-10

The science explained

The science behind it explained for a curious reader

Ordinary lime mortar hardens slowly by soaking up carbon dioxide from the air, so it never sets under water. Volcanic ash changes the chemistry. The ash is a glassy powder full of silica and alumina that is ready to react. With lime and water it builds new mineral crystals that knit the mix together, much as frost crystals knit loose snow into ice, but permanently. Because the reaction needs water rather than air, it works under the sea. Roman harbour walls go further: sea water seeping through slowly grows rare crystals in the pores, so the concrete becomes, as Pliny wrote around 79 CE, a single stone mass that grows stronger every day [3].

as of 2026-11-10

Sources

  1. Riddle solved: Why was Roman concrete so durable? (David L. Chandler) MIT News, 2023
  2. How seawater strengthens ancient Roman concrete University of Utah (U News), 2017
  3. Hydraulic Cement: Lost and Found (Tim Palucka, MRS Bulletin historical note) Springer Nature (Materials Research Society), 2001