Material Insights · Understanding the Material World

Seismometer: Overview

What it does

The job the technology does for people, in a short paragraph

A seismometer measures how the ground moves. It records earthquakes near and far, so that their place and size can be worked out, and it lets scientists see inside the Earth. Milne made a horizontal pendulum seismograph in Japan in 1880 [1], and today about 150 digital stations form the Global Seismographic Network [3], while 170 seismic stations are planned to watch for nuclear tests [7].

as of 2026-11-10

How it works

The working principle in plain words, step by step

The instrument's frame is fixed firmly to the ground, so it moves whenever the ground moves [2]. Inside, a mass hangs from a spring or a hinge, or swings as a pendulum [2]. Because of its inertia, the mass tends to stay where it is while the frame shakes around it [2]. The instrument measures the motion of the frame relative to the mass, and that difference is the ground motion [4]. Early seismographs drew it on paper with a pen. Modern instruments turn the relative motion into an electrical signal and record it digitally [2, 4]. Separate sensors measure up and down and the two sideways directions, and timing the arrival of waves at many stations locates the source.

as of 2026-11-10

Key figures

The handful of numbers that size it up, each with its unit, year and source

FigureValueUnitSource
Stations in the Global Seismographic Network150stations (about)[3]
Primary seismic stations of the CTBT International Monitoring System50stations[7]
Auxiliary seismic stations of the CTBT International Monitoring System120stations[7]
Lowest frequency a broadband seismometer senses0.008Hz[4]
Highest frequency a broadband seismometer senses50Hz[4]

as of 2026-11-10. The pages give no date for these counts; they describe the networks as they stand in 2026, when the pages were read. The CTBT counts are for the network when complete.

Where it is used

The main places and products the technology is found in

  • National and global earthquake monitoring networks [3]
  • Monitoring for underground nuclear tests [7]
  • Research on Earth's interior, such as its core [5]
  • Teaching and public seismology [3]

as of 2026-11-10

Scale today

How much of it there is now: units in use, made each year and who uses it

Installed
About 150 Global Seismographic Network stations [3]; 170 planned CTBT seismic stations [7]
Unit
stations
Note
Counts only these two global networks; national and local networks run many more instruments, for which no world total was found.

as of 2026-11-10

Sources

  1. John Milne Lemelson-MIT Program, Massachusetts Institute of Technology
  2. Seismometers, seismographs, seismograms - what's the difference? How do they work? U.S. Geological Survey
  3. GSN - Global Seismographic Network U.S. Geological Survey, Earthquake Hazards Program
  4. Seismometers EarthScope Consortium
  5. Geologist Richard Oldham's 1906 Paper on Seismic Wave Transmission Establishes the Existence of Earth's Core and Demonstrates the Value of Seismology for Studying the Structure of Earth's Deep Interior Stephen D. Norton, Science and Its Times (Gale), on Encyclopedia.com
  6. The International Monitoring System Comprehensive Nuclear-Test-Ban Treaty Organization (CTBTO)