Material Insights · Understanding the Material World

Stainless steel: Science

Principles

The science it rests on, with why each principle matters to it

Relies on
  • Passivation and corrosion resistance Chromium forms a thin, self-healing oxide film that makes the surface passive; the theory of this film came many years after Monnartz's work [1].
Limited by
  • The electrochemical cell Corrosion is an electrochemical reaction; where salt or acid breaks the film locally, small corrosion cells can still form pits.

as of 2026-11-11

Discoveries

The discoveries that made it possible: when, by whom and what was found

YearWhoWhat
1798Nicolas Louis Vauquelin, ParisDiscovery of chromium [7]
1821Pierre BerthierStudies of chromium alloys and ferrochromium [1]
1911Philipp MonnartzStainless steel needs at least 12% chromium and controlled carbon, published 1910 to 1911 [1]

as of 2026-11-11

The science explained

The science behind it explained for a curious reader

Picture two kinds of skin on a metal. Rust on plain steel is like dry flaking paint: it cracks and falls away, so water and air keep reaching new iron underneath. Chromium oxide on stainless steel is like a sealed coat of varnish only a few atoms thick: it sticks tightly, lets nothing through, and if it is scratched the chromium below reacts with air at once and closes the gap. Monnartz found that this works only when the steel holds at least about 12% chromium and little carbon [1], so that enough chromium is free to reach the surface. A full theory of the passive film came many years later [1].

as of 2026-11-11

Sources

  1. The history of stainless steels worldstainless (World Stainless Association)
  2. Chromium Royal Society of Chemistry, Periodic Table