Synthetic rubber: Overview
What it does
The job the technology does for people, in a short paragraph
Synthetic rubber is made by linking small petrochemical molecules, mainly butadiene, into long elastic chains [3]. The main type, styrene-butadiene rubber, was first made in Germany in 1929 [7] and made at scale in Germany and the United States during the Second World War [1][4]. In 2025 the world used about 16.77 million t of synthetic rubber, just over half of all rubber [6].
as of 2026-11-12
How it works
The working principle in plain words, step by step
Natural rubber is a long chain of isoprene units. Synthetic rubber copies the idea with other small molecules. Butadiene, a gas made from refinery and petrochemical streams, is mixed with styrene [3]. In emulsion polymerisation the two are stirred in water with fatty-acid or rosin soaps, which break them into tiny droplets [3]. A starter chemical opens their double bonds, and the molecules join end to end into long chains. Styrene units make the chain stiffer and tougher; butadiene units keep it springy. The result is a milky latex that is coagulated, dried and baled. Like natural rubber, it is then mixed with fillers and cross-linked by vulcanising with sulphur to make tyres and other goods [3].
as of 2026-11-12
Key figures
The handful of numbers that size it up, each with its unit, year and source
| Figure | Value | Unit | Year | Source |
|---|---|---|---|---|
| World synthetic rubber consumption (IRSG forecast) | 16.77 | million t | 2025 | [6] |
| World total rubber demand, natural and synthetic (IRSG forecast) | 32.49 | million t | 2025 | [6] |
| US synthetic rubber production | 756,042 | tons | 1945 | [2] |
| US GR-S plants in operation | 15 | plants | 1943 | [2] |
| World synthetic rubber consumption forecast by IRSG | 18.69 | million t | 2032 | [6] |
as of 2026-11-12. The 2025 and 2032 figures are IRSG forecasts from its December 2025 outlook, reported in January 2026 [6]. Sources differ on wartime output: 756,042 tons in 1945 [2], 495,000 long tons in 1944 [3], over 830,000 t a year by 1945 [5] and about 800,000 tons of SBR a year in the United States [7]; the table uses the 1945 US figure in the tons its source gives.
Where it is used
The main places and products the technology is found in
- Tyres, the largest use: about 55% of synthetic rubber goes into car tyres [7]
- Tyres and other goods for the US war effort, made from GR-S [1]
- Belts, hoses, seals and footwear made from the wider family of synthetic rubbers
- Oil-resistant parts made from neoprene, a high-strength oil-resistant rubber [7]
as of 2026-11-12
Scale today
How much of it there is now: units in use, made each year and who uses it
- Made per year
- About 16.77 million t of synthetic rubber used in 2025 (IRSG forecast) [6]
- Unit
- t of synthetic rubber
- Year
- 2025
- Note
- Counts all synthetic rubbers, not only styrene-butadiene; natural rubber was about 15.73 million t [6]. Both are IRSG forecasts made in December 2025.
Estimate · as of 2026-11-12
Sources
- United States Synthetic Rubber Program 1939-1945 Historical Marker The Historical Marker Database (HMdb.org); marker erected 1998 by the American Chemical Society
- The American Synthetic Rubber Research Program (Macrogalleria page with no title of its own) Polymer Science Learning Center, University of Southern Mississippi
- Synthetic Rubber for World War II and After (Stacy Fang) LearnChemE, University of Colorado Boulder (student paper in the Old and New Chemical Processes collection; no date shown)
- Fritz Hofmann: Die Synthese des Kautschuks Pharmazeutische Zeitung (Christoph Friedrich), 2016
- IRSG expects 12% growth in rubber demand to 2032 European Rubber Journal, 2026
- The rise of synthetic rubber Encyclopaedia Britannica