Thermal imaging: Overview
What it does
The job the technology does for people, in a short paragraph
A thermal imaging camera makes a picture from the infrared light that objects give off because they are warm, so it can show people and hot spots in darkness [7]. Electricians, firefighters and doctors use it, and health officials have used it to screen travellers for fever [1, 4, 6]. The first commercial scanner, made in Sweden for power line inspections, appeared in 1965 [4], and uncooled cameras widened civil use from the 1990s [4, 5].
as of 2026-11-11
How it works
The working principle in plain words, step by step
Every object gives off light, and hotter objects glow more brightly and at shorter wavelengths [7]. At body temperature the glow is infrared, with a wavelength of around 10 micrometres, far too long for eyes to see [7]. A thermal camera focuses this radiation with a lens made of an infrared-clear material, such as germanium [8], onto a grid of tiny detectors. In most modern cameras each detector is a microbolometer: a tiny plate, often of vanadium oxide, that warms when infrared falls on it, which changes its electrical resistance [5, 10]. The camera reads each pixel's resistance and turns the pattern into a picture in which brightness or colour stands for temperature. Microbolometers need no cooling, unlike many earlier detectors [6].
as of 2026-11-11
Key figures
The handful of numbers that size it up, each with its unit, year and source
| Figure | Value | Unit | Year | Source |
|---|---|---|---|---|
| Wavelength of the infrared glow of the human body (year is the page's publication year) | 10 | micrometres | 2013 | [7] |
| Lower end of the spectral range of fire-service thermal imagers (range 8 to 14 micrometres) | 8 | micrometres | 2008 | [6] |
| Typical cost of a fire-service thermal camera | 10,000 | USD | 2008 | [6] |
| Columns of the larger typical fire-service sensor (by 240 rows) | 320 | columns | 2008 | [6] |
as of 2026-11-11. The NIST figures are from a July 2008 report, which gives no other year for them [6]; the body-glow wavelength is physics, and its row carries 2013, the publication year of the Cool Cosmos page [7].
Where it is used
The main places and products the technology is found in
- Inspection of power lines and electrical equipment, the first commercial use [4]
- Firefighting, where most fire services have bought or are considering cameras [6]
- Medical thermography, used in rheumatology from 1959 [1]
- Fever screening of travellers at airports, as in the SARS outbreak [1]
- Optical gas imaging to see gas leaks [4]
as of 2026-11-11
Scale today
How much of it there is now: units in use, made each year and who uses it
- Installed
- No world count of thermal cameras in use was found
- Unit
- cameras
- Note
- Ring notes increasing sales of thermographic cameras but gives no figure [1].
as of 2026-11-11
Sources
- The Herschel Heritage to Medical Thermography Francis Ring, Journal of Imaging 2(2), 13 (MDPI), doi:10.3390/jimaging2020013, 2016
- Flir Company History Teledyne Flir
- The History, Trends, and Future of Infrared Technology David Schmieder, Defense Systems Information Analysis Center (DSIAC) Journal, 2015
- Performance Metrics for Fire Fighting Thermal Imaging Cameras - Small- and Full-Scale Experiments (NIST Technical Note 1499) Francine Amon, Nelson Bryner, Andrew Lock and Anthony Hamins, National Institute of Standards and Technology, 2008
- What is Infrared? Cool Cosmos, IPAC, California Institute of Technology, 2013
- Mineral Commodity Summaries 2026: Germanium US Geological Survey, 2026
- Samuel P. Langley (1834-1906) High Altitude Observatory, National Center for Atmospheric Research