Material Insights · Understanding the Material World

Vacuum tube (thermionic valve)

A heated cathode and control grid in a vacuum amplify and switch signals.

Moving information · Telecommunication · No. 257

  • Second industrial revolution
  • Readiness 9 of 9
  • Component
Moving information · Technology

The valve began as a light bulb with an extra plate inside; four decades later 18,000 of them ran ENIAC.

Chart: Illustration: Vacuum tube (thermionic valve)

Where it comes from

Chart: Map of where it comes from

Fleming had studied the Edison effect, a current flowing inside lamp bulbs, since the 1880s. Advising Marconi's company, he built a bulb in 1904 that let current pass only one way and so could detect wireless signals.

Three things to know
  1. Fleming's 1904 valve could only let current pass one way, which was enough to detect radio signals.
  2. De Forest added a third element in 1906, and the resulting triode could amplify, oscillate and detect.
  3. ENIAC used about 18,000 tubes and 150 kW of electricity; the transistor of 1947 began to replace them.
The journey
  1. 1 CathodeA heated filament or coated sleeve gives off electrons
  2. 2 VacuumA sealed, airless bulb lets the electrons fly freely
  3. 3 GridA wire mesh with a small voltage opens or chokes the flow
  4. 4 PlateA positive metal plate collects the electrons as a current
  5. 5 CircuitThe strong plate current copies the weak grid signal, amplified
Covered in Light, semiconductors and information: from the transistor to the networkEngineering
Go deeper pick a tab to open it in full