Water clock: Science
Principles
The science it rests on, with why each principle matters to it
Limited by- Pascal's law of hydraulics Water pressure at the hole grows with the depth of water above it, so the flow slows as the vessel empties; makers fought this with sloping sides and constant-level tanks [1].
- Bernoulli's principle The speed of water leaving a hole depends on the height of water above it, which sets how fast the level falls and how the hour marks must be spaced.
as of 2026-11-10. The catalogue's link to water_cycle_hydrology is left out: no source ties the working of the clock to the water cycle.
The science explained
The science behind it explained for a curious reader
Fill a plastic bottle, make a small hole near the bottom and watch the jet. At first it shoots far, but as the bottle empties the jet weakens and the level drops more slowly. The water above the hole pushes down, and the deeper it is, the harder it pushes. A water clock with straight sides would therefore run fast at first and slow later. Egyptian makers gave their bowls sloping sides, so that the level fell at an even rate [1, 4]. A better fix keeps the supply tank always full, so that the push stays constant and water drips into a measuring vessel at an even rate [1]. Temperature matters too: warm water flows more easily than cold [2].
as of 2026-11-10
Sources
- A Walk Through Time - Early Clocks National Institute of Standards and Technology (NIST)
- Wikipedia: Water clock
- Egyptian Water Clock Science Museum Group Collection