Woodblock printing: Science
Principles
The science it rests on, with why each principle matters to it
Relies on- Surface chemistry and adsorption Printing works only if ink wets the wood, then leaves it for the paper; Japanese printers size paper with an animal-skin paste and spread pigment with rice paste to control this [6].
as of 2026-11-11
The science explained
The science behind it explained for a curious reader
Think of a rubber stamp the size of a page. Everything that should print is left standing; everything that should stay blank is cut away. When ink is brushed over the block, it sits only on the raised parts. Pressing paper onto it is a contest between two surfaces: the ink must cling to the wood well enough to stay put, then cling to the paper more strongly when the two are pressed together. Printers tune this with water and paste. Japanese printers dampen the block, add a dab of rice paste to spread the pigment evenly and size the paper so the colour does not run [6]. Rubbing harder pushes more ink into the fibres and gives a darker tone [6].
as of 2026-11-11
Sources
- How to make a woodblock print like Hiroshige British Museum blog (Carol Wilhide Justin), 2025