Material Insights · Understanding the Material World

X-ray imaging: Overview

What it does

The job the technology does for people, in a short paragraph

X-ray imaging shows the inside of the body without cutting it open. X-rays pass through soft tissue but are stopped more by bone and dense matter, so they cast a shadow picture on film or a sensor. Röntgen discovered them in 1895, and doctors were using them in January 1896 [1, 2]. About 4.2 billion medical radiological examinations are made each year [3].

as of 2026-11-10

How it works

The working principle in plain words, step by step

An X-ray tube is a vacuum tube with two electrodes. A heated filament, the cathode, gives off electrons, and a high voltage hurls them at a metal target, usually tungsten [5]. When the electrons stop suddenly in the metal, a small part of their energy comes out as X-rays, light of very short wavelength. The beam passes through the patient. Each tissue absorbs a share of it: bone, rich in calcium, absorbs most; muscle and fat less; air in the lungs almost none. What gets through falls on a detector, once photographic film and now usually a digital sensor, which records a shadow map of the body. Computed tomography turns the tube around the patient and a computer builds cross-sections from many such shadows [6].

as of 2026-11-10

Key figures

The handful of numbers that size it up, each with its unit, year and source

FigureValueUnitYearSource
Medical radiological examinations worldwide per year, average 2009 to 20184.2billion examinations2018[3]
Average yearly effective dose per person from medical exposure0.57mSv2018[3]
Days from Röntgen's discovery to the first clinical X-ray (calculated, 8 November 1895 to 11 January 1896)64days1896[1, 2]
Years from the start of Hounsfield's CT work to the first patient scan (calculated, 1967 to 1971)4years1971[6]

as of 2026-11-10. The examination count and dose are UNSCEAR's averages for 2009 to 2018 [3].

Where it is used

The main places and products the technology is found in

  • Plain radiographs of bones and teeth at the doctor's and the dentist's [7]
  • Fluoroscopy, moving X-ray pictures that guide procedures
  • Computed tomography, which builds cross-sections from X-rays, from 1971 [6]
  • Finding bullets and broken bones in war, from the Greco-Turkish War of 1897 [7]
  • Security screening of luggage at airports, and analysis of materials [7]

as of 2026-11-10

Scale today

How much of it there is now: units in use, made each year and who uses it

Users
About 4.2 billion medical radiological examinations a year [3]
Unit
examinations per year
Year
2018
Note
UNSCEAR average for 2009 to 2018; counts all medical radiological examinations, CT included.

as of 2026-11-10

Sources

  1. Rontgen Discovers X-Rays HistoryofInformation.com
  2. John Hall-Edwards Wikipedia
  3. A summary of UNSCEAR evaluation on medical exposure to ionizing radiation and call for more representative data Radiation Medicine and Protection, vol. 5 no. 1 (Jing Chen), via DOAJ, 2024
  4. William D. Coolidge Edison Tech Center
  5. Milestones: First Computerized Tomography (CT) X-ray Scanner, 1971 IEEE, Engineering and Technology History Wiki
  6. 125 Years of X-Rays (EarthDate episode 185) EarthDate, 2020