Ziegler-Natta polymerisation: Overview
What it does
The job the technology does for people, in a short paragraph
Ziegler-Natta catalysts make long plastic chains from ethylene and propylene gas at low pressure. They opened the way to low-pressure, high-density polyethylene and to the first commercial polypropylene, which Montecatini made on an industrial scale in 1957 [3]. Polyolefins, the family these plastics belong to, are now the most used plastics [2].
as of 2026-11-12
How it works
The working principle in plain words, step by step
A Ziegler-Natta catalyst is a compound of a transition metal, most effectively titanium [1], working with an organoaluminium partner [1]. The monomer, ethylene or propylene gas, attaches to the metal centre, and each new molecule slots into the growing chain, one at a time. Low pressure is enough [1], unlike the older high-pressure route to polyethylene. For propylene, the surface of the catalyst controls which way each unit sits in the chain. Natta showed that this can give polymers with an ordered structure, called isotactic, syndiotactic and di-isotactic [3]. In isotactic polypropylene the side groups all lie on the same side of the chain, so the chains pack together into a strong crystalline plastic.
as of 2026-11-12
Key figures
The handful of numbers that size it up, each with its unit, year and source
| Figure | Value | Unit | Year | Source |
|---|---|---|---|---|
| World production of resins and fibres (Geyer and others) | 380 | Mt | 2015 | [5] |
| World plastics production (Plastics Europe, preliminary estimate) | 413.8 | Mt | 2023 | [6] |
| Polyethylene share of cumulative non-fibre plastics produced 1950 to 2015 | 36 | % | 2015 | [5] |
| Polypropylene share of cumulative non-fibre plastics produced 1950 to 2015 | 21 | % | 2015 | [5] |
as of 2026-11-12. The shares cover all polyethylene and polypropylene, not only grades made with Ziegler-Natta catalysts; low-density polyethylene is made by the older high-pressure route. The 380 Mt (resins and fibres, 2015 [5]) and 413.8 Mt (plastics including recycled and bio-based, some fibres only, 2023 [6]) are measured differently and must not be read as growth between the two years.
Where it is used
The main places and products the technology is found in
- Polypropylene fibres and films
- High-density polyethylene pipes, bottles and containers
- Moulded polypropylene parts such as car and household components
as of 2026-11-12
Scale today
How much of it there is now: units in use, made each year and who uses it
- Made per year
- No world figure for Ziegler-Natta-made polymer was found; polyethylene and polypropylene were 57% of non-fibre plastics produced 1950 to 2015
- Users
- Polymer producers and plastics converters worldwide
- Unit
- share of cumulative plastics production
- Year
- 2015
- Note
- Counts all polyethylene and polypropylene, not only catalyst-made grades [5].
as of 2026-11-12
Sources
- Patent solution in a canning jar Max-Planck-Gesellschaft, 2014
- The legacy of Karl Ziegler and Giulio Natta EuChemS (European Chemical Society), Historical Landmarks
- Giulio Natta: Biographical The Nobel Prize
- Production, use, and fate of all plastics ever made Science Advances (Geyer, Jambeck and Law), vol. 3, issue 7, 2017
- Plastics – the fast Facts 2024 Plastics Europe AISBL (copy hosted by industriambiente.com), 2024