Light, semiconductors and information: from the transistor to the network: Key terms, quiz and sources
All courses / Understanding Engineering / Module 9: Light, semiconductors and information: from the transistor to the network Wrap-upLight, semiconductors and information: from the transistor to the network: review
Key terms
- Electromagnetic wave
- A travelling pattern of electric and magnetic fields, each renewing the other, that crosses empty space at about 300,000 km a second.
- Photon
- The packet of energy in which light and other electromagnetic waves are given to matter; its energy is Planck's constant times frequency.
- Electronvolt (eV)
- The energy an electron gains crossing one volt, about 1.6 x 10^-19 joule; a convenient unit for photons and bonds.
- Antenna
- A conductor in which charge is made to oscillate to launch a wave, or in which a wave drives charge to give a signal; its best size is a simple fraction of the wavelength.
- Refractive index
- The ratio of the speed of light in a vacuum to its speed in a material; 1.5 for glass.
- Total internal reflection
- The complete reflection of light at a boundary into a lower-index material when it meets the boundary beyond the critical angle.
- Decibel (dB)
- A logarithmic scale for power ratios: 10 dB is a factor of ten, 20 dB a factor of one hundred.
- Single-mode fibre
- A fibre whose core, about 9 micrometres wide, allows only one light path, so pulses do not smear over long distances.
- Band gap
- The energy gap between the filled and empty electron bands of a solid; it sorts metals, semiconductors and insulators and sets the colour of an LED.
- Doping
- Adding a tiny, controlled amount of another element to a semiconductor to give it free electrons (n-type) or holes (p-type).
- p-n junction
- The boundary between p-type and n-type material, where a built-in field lets current pass one way only and sorts light-made charges.
- Diode
- A device with one p-n junction that passes current in one direction, used for rectifying, light detecting and light emitting.
- Transistor
- A semiconductor device in which a voltage on a gate controls a current between two other terminals, used as a switch or an amplifier.
- Integrated circuit
- Many transistors and wires printed together on one piece of silicon.
- Photolithography
- Printing a pattern onto a wafer with light through a mask and a light-sensitive coating, repeated layer by layer.
- Moore's law
- The observation that the number of transistors on a chip doubles about every two years; a pattern of the industry, not a law of nature.
- Bit
- The answer to one yes-or-no question; the smallest unit of digital information.
- Signal-to-noise ratio
- The ratio of signal power to noise power, often given in decibels.
- Channel capacity
- Shannon's ceiling on the error-free bit rate of a noisy channel: bandwidth x log2(1 + signal-to-noise ratio).
- Power usage effectiveness (PUE)
- Total power used by a data centre divided by the power reaching its IT equipment; 1.4 means 0.4 W of overhead per watt of computing.
Try it in the table
- Open 'Mobile broadband (4G and 5G)' and 'Radio waves'. Pick the three bands an Indian operator uses, work out each wavelength and quarter-wave antenna length as in Estimate 1, and say which band you would choose for a village and which for a stadium.
- Open 'Optical fibre cable' and 'Submarine communications cable'. Note the fibre count and the spacing of repeaters. For a 6,000 km route at 0.2 dB per km, work out the total loss without amplifiers and the number of amplifiers at 80 km spacing.
- Open 'Solar PV cell' and 'Solar PV module'. Take the module power and area given, compute its efficiency, and redo Estimate 4 for a 3 kW rooftop: how many modules, and how many kWh a year at 5 peak sun hours?
- Open 'LED lamp' and 'Lighting and displays'. Count the lamps in your home or office, estimate their hours of use, and redo Estimate 5 to find the rupees saved a year by the LED against a 12 lm/W filament lamp.
- Open 'Silicon wafer', 'Integrated circuit (chip)' and 'Planar process and photolithography'. For a 300 mm wafer and a chip of 50 mm2, estimate the number of good chips at 85 per cent yield, then see how the wafer price you assume changes the cost per chip.
- Open 'Data-centre server' and 'Data centres'. Take a 500 W server in a facility with a PUE of 1.5: how many kWh does it cause in a year, what does that cost at ₹7 per kWh, and how much of that is cooling and power conversion?
Final quiz
A mobile signal at 900 MHz has a wavelength of about:
Wavelength = 300 / 900 MHz = 0.33 m. A quarter-wave antenna would then be about 8 cm.Which statement best explains why a mobile tower's radio waves cannot break chemical bonds?
Matter absorbs photons one at a time, so what counts is photon energy, which is set by frequency. More power makes more weak photons, which heat but do not break bonds.Why is a single-mode fibre used for long distances instead of a wide-core fibre?
In a wide core, rays at different angles take paths of different length and arrive at different times. A narrow core allows one path only.Silicon has a gap of 1.12 eV. Which light can lift an electron across it?
Photon energy = 1,240 / wavelength. At 700 nm it is 1.8 eV, above the gap. At 1,500 nm it is 0.83 eV, below, and a radio photon is far below.An LED lamp gives 100 lm/W and a filament lamp 12 lm/W. For the same light, the LED uses about what fraction of the filament lamp's power?
Power for a given light is inversely proportional to lumens per watt: 12 / 100 = 0.12, about one eighth, matching the table's 8 W against 67 W.A transistor used as an amplifier gives 10 mA per volt on its gate. A 10 mV input change flows through a 2,000 ohm load. What is the output voltage change?
The current changes by 10 mA/V x 0.01 V = 0.1 mA. Across 2,000 ohms that is 0.2 V, a gain of 20.Why did processor clock speeds stop rising near 3 to 5 GHz?
With voltage stuck near a minimum set by the transistor's turn-off behaviour, faster switching meant more power per area than cooling could remove.Shannon's formula says that doubling signal power on a clean channel, compared with doubling the bandwidth, gives:
Capacity is proportional to bandwidth but only to the logarithm of signal-to-noise, so doubling power adds about one bit per hertz, while doubling bandwidth doubles the rate.Sources for this module
- Bloomfield, How Things Work (Wiley, 2015) · ch. 12, 'Electromagnetic Waves' (radio, antennas, bandwidth); ch. 13, 'Light' (refraction, photons, LEDs and p-n junctions); ch. 14, 'Optics and Electronics' (lenses, optical fibres, transistors, logic). Used as a source of ideas only; all text, examples and numbers here are the author's own.
- Feynman, Leighton and Sands, The Feynman Lectures on Physics, vol. I (Caltech online edition) · further reading (the site does not permit automated fetching, so the physics was checked against standard values and the sources below): ch. 26, 'Optics: The Principle of Least Time', https://www.feynmanlectures.caltech.edu/I_26.html; ch. 28, 'Electromagnetic Radiation', https://www.feynmanlectures.caltech.edu/I_28.html
- Feynman, Leighton and Sands, The Feynman Lectures on Physics, vol. III (Caltech online edition) · further reading, as above: ch. 1, 'Quantum Behavior', https://www.feynmanlectures.caltech.edu/III_01.html; ch. 14, 'Semiconductors', https://www.feynmanlectures.caltech.edu/III_14.html
- LONGi Green Energy press releases (21 April 2025, 28 April 2026, 14 July 2026; read November 2026) · 27.81 per cent HIBC silicon cell (ISFH) and 34.85 per cent tandem (NREL) in 2025; 28.13 per cent silicon cell (ISFH) and 35.5 per cent tandem (ESTI) in 2026; https://www.longi.com/us/news/longi-world-record-crystalline-silicon-perovskite/, https://www.longi.com/en/news/hybrid-interdigitated-back-contact-cell-record/, https://www.longi.com/en/news/crystalline-silicon-perovskite-tandem-solar-cell-new-world-efficiency-2026/
- International Telecommunication Union, Recommendation ITU-T G.652, Characteristics of a single-mode optical fibre and cable (08/2024) · standard single-mode fibre; G.652.D cabled attenuation of at most 0.3 dB per km at 1,550 nm, with about 0.2 dB per km typical of good fibre; https://www.itu.int/dms_pubrec/itu-t/rec/g/T-REC-G.652-202408-I!!TOC-HTM-E.htm
- Prysmian, 'Single-mode optical fibre G.652.D' data sheet (read November 2026) · cabled attenuation at most 0.22 dB per km at 1,550 nm; mode field diameter 10.4 micrometres; https://ec.prysmian.com/sites/ec.prysmian.com/files/media/documents/G652D.pdf
- TIA/ISO structured-cabling standards for Category 6A (ANSI/TIA-568.2-D; ISO/IEC 11801) · Category 6A insertion-loss limit of 45.3 dB per 100 m at 500 MHz, as printed in trueCABLE's 'Cat6A Augmented CMP 4PR U/UTP 23AWG' data sheet, https://cdn.shopify.com/s/files/1/0014/6404/1539/files/Cat6A-Unshielded-Plenum.pdf; 10GBASE-T reach of 100 m
- Press Information Bureau, Ministry of Communications (15 June 2022 and 2 August 2022, read November 2026) · bands in India's 2022 auction: 600, 700, 800, 900, 1800, 2100, 2300, 2500 and 3300 MHz and 26 GHz; 600 MHz drew no bids; https://pib.gov.in/PressReleasePage.aspx?PRID=1834126 and https://pib.gov.in/PressReleasePage.aspx?PRID=1847279
- Carbon Brief, George Kamiya, 'Factcheck: What is the carbon footprint of streaming video on Netflix?' (2020, read November 2026), based on IEA data · 0.077 kWh per hour of streaming in 2019: devices 72 per cent, networks 23 per cent, data centres 5 per cent; the Shift Project's implied 6.1 kWh and its corrected figure of about 0.8 kWh; https://carbonbrief.org/factcheck-what-is-the-carbon-footprint-of-streaming-video-on-netflix/
- International Energy Agency, 'Key questions on energy and AI' (2026, read November 2026) · data-centre electricity use of 485 TWh in 2025, up 17 per cent; about 950 TWh projected for 2030, about 3 per cent of world demand; AI-focused data-centre use projected to triple from 2025 to 2030; https://iea.org/reports/key-questions-on-energy-and-ai/executive-summary
- Ministry of Power, Government of India, 'Power Sector at a Glance' (data up to March 2026; September 2025 edition for 2024-25; read November 2026) · India's total electricity generation including renewables: 1,847.9 BU (TWh) in 2025-26 and 1,829.7 BU in 2024-25; https://powermin.gov.in/sites/default/files/uploads/power_sector_at_glance_deleted_.pdf and https://powermin.gov.in/sites/default/files/uploads/power_sector_at_glance_Sep_2025.pdf
- Press Information Bureau, Ministry of Power, UJALA release (5 January 2022, read November 2026) · 36.78 crore LED bulbs distributed and about 47.78 billion kWh a year saved; https://pib.gov.in/PressReleasePage.aspx?PRID=1787594
- Shannon, C. E., 'A Mathematical Theory of Communication', Bell System Technical Journal 27 (1948) · channel capacity theorem for a band-limited channel with noise
- Landauer, R., 'Irreversibility and Heat Generation in the Computing Process', IBM Journal of Research and Development 5(3), 1961 · minimum energy to erase a bit, kT ln 2
- Moore, G. E., 'Cramming More Components onto Integrated Circuits', Electronics 38(8), 1965 · the observed doubling of components per chip; the later revision to two years is the usual statement of the law
- NVIDIA, 'NVIDIA H100 Tensor Core GPU Architecture' white paper (2022) · about 80 billion transistors on one H100 chip
- Richter, A., Hermle, M. and Glunz, S. W., 'Reassessment of the Limiting Efficiency for Crystalline Silicon Solar Cells', IEEE Journal of Photovoltaics 3(4), 2013 · limiting efficiency of about 29.4 per cent for silicon