Bicycle: Bill of materials
About these figures
Which unit, study and year the composition figures describe, and how they vary
Steel frame: an 18.0 kg bicycle in a 2009 study of China, with 13.0 kg steel, 2.0 kg plastic, 2.0 kg rubber and 1.0 kg aluminium [2]; plastic has no node here. Aluminium frame: the 17.0 kg ecoinvent 3.4 bicycle with carriers and lights, which also holds 0.32 kg of flexible polyurethane foam [3]. The ECF study assumes a 19.9 kg commuter bicycle of 14.6 kg aluminium, 3.7 kg steel and 1.6 kg rubber without naming its frame [1]. Chains, spokes, tyres, gears and saddles are not yet nodes.
as of 2026-11-16
Components
The products inside one unit, with quantity, mass share and cost share
| Material | Role | Amount in one unit | Share of the unit's mass |
|---|---|---|---|
| Rolling bearing | Component | Not given | – |
| Hubs, bottom bracket, headset and pedals contain bearings, and cartridge bearings on bikes almost always have seals [7]. No source gives the count or mass per bicycle, so quantity is left empty; the steel in the bearings is already inside the steel totals below and must not be added again. | |||
as of 2026-11-16
Direct materials
The commodities and chemicals in one unit as bought, with amount, mass share, cost share and recycled content
Variant 1 Steel frame| Material | Role | Amount in one unit | Share of the unit's mass |
|---|---|---|---|
| St Steel | Structural | 13 kg | 72.2% |
| Steel in an 18.0 kg bicycle in a 2009 inventory for China; the study does not say which parts [2] | |||
| Rbr Natural rubber | Structural | 2 kg | 11.1% |
| The study says only 'rubber', so the node for natural rubber stands for tyres, tubes and grips; the mix of natural and synthetic rubber is not given [2] | |||
| Al Aluminium | Structural | 1 kg | 5.6% |
| Aluminium in the same 18.0 kg, mostly steel, bicycle [2] | |||
| Material | Role | Amount in one unit | Share of the unit's mass |
|---|---|---|---|
| Al Aluminium | Structural | 7.5 kg | 44.5% |
| Wrought aluminium alloy; the dataset has an aluminium frame [3] | |||
| St Steel | Structural | 6.5 kg | 38.3% |
| Calculated: 4.9 kg low-alloyed steel (28.9%) plus 1.6 kg chromium steel 18/8 (9.4%) in the 17.0 kg ecoinvent 3.4 bicycle [3] | |||
| HDPE High-density polyethylene | Structural | 2 kg | 11.6% |
| High-density polyethylene granulate in the dataset, standing for plastic parts; the dataset does not say which parts [3] | |||
| SBR Styrene-butadiene rubber | Structural | 0.6 kg | 3.3% |
| The dataset lists 'synthetic rubber' only; SBR is the node closest to it, so this link is indicative [3] | |||
| Pnt Paints and coatings | Consumable | 0.1 kg | 0.6% |
| Coating powder in the dataset [3] | |||
as of 2026-11-16
How it is put together
The main steps from parts and materials to the finished unit
| Step | What happens | Technology | Source |
|---|---|---|---|
| Make the frame | Frame raw material is extracted and processed, then made into a frame; the Berlin study counts these as its first phases, before the other parts and assembly | – | [9] |
| Make wheels, tyres and tubes | Rim, spoke and hub makers and rubber firms supply wheels and tyres; India's Hartex Rubber makes 18 million tyres and 36 million inner tubes a year | Pneumatic tyre | [12] |
| Make cranks, handlebars and chain rings | Component firms such as India's Amar Wheels make aluminium cranksets, handlebars and chainrings | – | [12] |
| Assemble the bicycle | The maker fits bought-in and own parts into the finished bicycle; Hero's highly integrated Ludhiana plant produces 19,000 bicycles a day | – | [15][9] |
| Test against safety standards | Bicycles are tested against safety standards such as ISO 4210 and India's IS 10613 | – | [29][30] |
as of 2026-11-16
Technologies inside it
The technologies inside the product, with how much of each per unit
Embodies- Tyr Pneumatic tyre Every bicycle runs on air-filled tyres; a Dunlop pneumatic cycle tyre made in 1888 survives in the Science Museum [26]
- Wh Wheel and axle Spoked front and rear wheels turning on hub bearings [22][7]
- Ger Gear train Hub or derailleur gears change the ratio between pedalling and wheel turns: 3 gears in the Cortina U1 hub, 21 speeds on the Hero Compass [4][5]
as of 2026-11-16
Sources
- Quantifying CO2 savings of cycling European Cyclists' Federation (Blondel, Mispelon, Ferguson), 2011
- Comparative environmental impacts of electric bikes in China Cherry, Weinert and Yang, Transportation Research Part D 14 (UC Davis ITS copy), 2009
- Bike sharing (openLCA 1.7.4 case study) GreenDelta GmbH (Recanati and Ciroth), 2018
- Cortina U1 3-speed City Bike Mantel
- Hero Compass cycle details Hero Cycles
- Bicycle bearings: everything you need to know BikeRadar, 2024
- Application of Life Cycle Sustainability Assessment to the bamboo and aluminum bicycles in surveying social risks of developing countries Chang, Schau and Finkbeiner, TU Berlin (2nd World Sustainability Forum), 2012
- India enters the global bicycle industry supply chain Show Daily, 2025
- Hero Cycles (member page) All India Cycle Manufacturers Association (AICMA)
- Rover 'Safety' Bicycle, 1885 Science Museum Group
- Pneumatic cycle tyre (object record) Science Museum Group
- ISO 4210-1:2023 Cycles: safety requirements for bicycles, Part 1: Vocabulary ISO (preview on iTeh Standards), 2023
- IS 10613:2023 write-up: Cycles, safety and performance requirements for bicycles Bureau of Indian Standards, 2023