Display panel (LCD and OLED): Bill of materials
About these figures
Which unit, study and year the composition figures describe, and how they vary
Glass is about 80% and polariser film about 20% of an LCD panel's mass, before the backlight is added [7]. The LCD panel unit of a 27-inch monitor weighs about 12.2 kg per square metre of screen (calculated) [8]. The steel, indium and tin amounts are calculated from that mass, so treat them as indicative. Display glass substrate, polariser film, backlight unit and liquid crystal mixtures are not yet nodes. OLED panel data per square metre were not found.
as of 2026-11-15
Components
The products inside one unit, with quantity, mass share and cost share
| Material | Role | Amount in one unit | Share of the unit's mass |
|---|---|---|---|
| Integrated circuit (chip) | Component | Not given | – |
| Driver chips that switch the rows and columns of pixels are bonded to the glass edge or to flexible circuits, in LCD and OLED panels alike; the number depends on screen size and resolution and no source gave it. | |||
| Printed circuit board | Component | Not given | – |
| Control boards and flexible circuits carry the driver electronics; no source gave their mass or number per square metre of panel. | |||
as of 2026-11-15
Direct materials
The commodities and chemicals in one unit as bought, with amount, mass share, cost share and recycled content
Variant LCD| Material | Role | Amount in one unit | Share of the unit's mass |
|---|---|---|---|
| St Steel | Structural | 3.67 kgrange 2.45 to 4.89 kg | 30% |
| The metal backplane of the backlight is electro-galvanised cold-rolled steel (SECC) and is about 20 to 40% of the panel module's weight [17]. The amount is calculated by applying 20, 30 and 40% to 12.2 kg per m2, the LCD panel unit of a 27-inch monitor [8]. | |||
| In Indium | Functional | 0.002 kgrange 0 to 0.008 kg | 0.017% |
| Calculated from 120 t of indium in 710,000 t of LCD panels on the world market in 2013, about 169 ppm [7], applied to 12.2 kg per m2 [8]; the low and high use 3 and 660 ppm. The ppm is for the panel without its backlight, so the figure is indicative and probably high. | |||
| Sn Tin | Functional | 0 kgrange 0 to 0 kg | – |
| Tin is the dopant of indium tin oxide. The study found tin at 6 to 11% of the indium mass, depending on device (PC monitors 6%, LCD TVs 11%) [7]; the amount is calculated from the indium figure above. | |||
Indicative · as of 2026-11-15. Pigment and mercury rows were removed: they came from a 1997 to 2000 monitor study whose primary inputs include process waste, and mercury was in fluorescent backlight lamps that LED backlights have replaced.
Cost breakdown
The share of the unit's cost in each component or stage
| Part | Share of cost | Variant | Year | Source |
|---|---|---|---|---|
| Panel materials and module components | 75% | LCD | 2010 | iSuppli: 75% or more of total panel cost; a lower bound [39] |
| Fixed or capital costs (factory depreciation) | – | LCD | 2010 | iSuppli: 15% to 25% of total panel cost, depending on size, market and depreciation rates [39] |
as of 2026-11-15
How it is put together
The main steps from parts and materials to the finished unit
| Step | What happens | Technology | Source |
|---|---|---|---|
| Draw the glass | Display glass (an alkaline earth boro-aluminosilicate in Corning's case) is drawn into thin sheet by the fusion process; Corning made the first Gen 10 and Gen 10.5 sheet sizes for the largest panel factories. | Glassmaking | [12][4] |
| Build the transistor array | Layers are deposited and patterned on the glass to form a thin-film transistor at every pixel and transparent indium tin oxide electrodes. In a Taiwanese TFT-LCD plant studied in 2016, the array system used the most electricity, 21.8% of the total. | Planar process and photolithography | [40][41] |
| Form the cell (LCD) | A second glass plate with colour filters is joined to the array plate and liquid crystal is sealed between them; polarisers are laminated to the outside. | – | [7] |
| Lay down the light emitters (OLED) | Organic layers are evaporated in vacuum through a fine metal mask onto the transistor backplane, then sealed with thin inorganic and organic films. | – | [14][13] |
| Lift off the film (flexible OLED) | For flexible panels the transistors are made on polyimide cast on a carrier glass; a laser releases the film from the glass. | Laser | [13] |
| Assemble the module | Driver chips and flexible circuits are bonded to the panel edge and, for an LCD, the backlight with its metal backplane, light guide and LED strips is added. | – | [17] |
as of 2026-11-15
Technologies used to make it
The technologies used to make it, at which step
Made with- Gl Glassmaking Drawing thin alkali-free glass sheet by the fusion process Corning's display glass is sold as fusion-drawn sheet [12], made by a fusion process Corning invented [4].
- Lit Planar process and photolithography Patterning transistors and electrodes on the glass The array stage, where the transistors and electrodes are patterned, was the largest electricity user in a Taiwanese TFT-LCD plant [41].
- Lsr Laser Excimer laser annealing of the polysilicon transistors and laser lift-off of the polyimide film (flexible OLED) Described for a flexible phone panel [13].
as of 2026-11-15
Technologies inside it
The technologies inside the product, with how much of each per unit
Embodies- Tsr Transistor A thin-film transistor at each pixel switches it; Bernard Lechner of RCA conceived placing a transistor at each dot of a matrix display in 1968 [28].
- LED Lighting and displays LED lighting is the backlight of an LCD, and OLED pixels are themselves electroluminescent emitters; the twin technology node covers both.
as of 2026-11-15
Sources
- Corning Incorporated annual report on Form 10-K for 2025 Corning Incorporated, 2026
- Potential and Recycling Strategies for LCD Panels from WEEE (Ueberschaar, Schlummer, Jalalpoor, Kaup and Rotter) Recycling (MDPI), vol. 2, article 7, 2017
- Life Cycle Assessment Report: LCD Monitor FlexScan EV2740X (cradle to grave, 19 May 2023) EIZO Corporation, 2023
- Corning EAGLE XG Glass (product information sheet) Corning Display Technologies, 2023
- Technologies for Flexible AMOLEDs (Hong, Yoo, Jeon and others, LG Display) Information Display (SID), 2015, Information Display, January/February 2015 issue (archive path)
- OLED technology: introduction and basics OLED-Info, 2026
- Suppliers Carbon Footprint Investigation and Factors Comparative Analysis and Management: A Case Study of Metal Parts (SID 2025 Digest, paper 32-4) Society for Information Display, AUO Corporation, 2025
- The history of liquid-crystal display and its industry: developments from 1964 to 1988 Blaze Display Technology, 2018
- iSuppli Says LCD Panel Suppliers Struggling TWICE, 2010
- Exploratory study of dealing with substances of concern in a product with an ex-ante LCA (indium tin oxide in an LCD monitor) Delft University of Technology (master's thesis, R. V. van Breukelen), 2024
- The Evaluation of Energy Conservation Performance on Electricity: A Case Study of the TFT-LCD Optronics Industry (Wang, Sie, Chang and Chao, Energies 9(3), 206), abstract IDEAS RePEc, 2016