Material Insights · Understanding the Material World

Electric water heater: Bill of materials

About these figures

Which unit, study and year the composition figures describe, and how they vary

No bill of materials for a 15-litre geyser was found. The masses are calculated by applying the shares of OSO's 2025 declaration for a 190-litre Norwegian unit (net weight 34 kg; listed materials 34.1 kg: steel 24.5, insulation 4.4, plastics 3.9, brass 0.8, electrical parts 0.5 kg) to the masses of two 15-litre units [1][2][3]. Plastics, brass and electrical parts are not given nodes. The heating element and thermostat are not yet product nodes.

as of 2026-11-17

Direct materials

The commodities and chemicals in one unit as bought, with amount, mass share, cost share and recycled content

MaterialRoleAmount in one unitShare of the unit's massRecycled content
St SteelStructural7.76 kgrange 7.04 to 7.76 kg 71.8%53%
Estimate, calculated. Steel is 24.5 of the 34.1 kg of materials listed in OSO's 190-litre unit (net weight 34 kg), or 71.8%; that share is applied to the empty mass of the Havells unit (10.8 kg, amount and high) and the mass of the Midea unit (9.8 kg, low) [1][2][3]. A small tank probably has a different mix, so treat the figure as indicative. 53% of the steel in OSO's unit is post-consumer material [1].
PU Polyurethanes (MDI, TDI, polyols)Functional1.39 kgrange 1.26 to 1.39 kg 12.9%–
Estimate, calculated in the same way: rigid polyurethane insulation is 4.4 of 34.1 kg, or 12.9%, in the 190-litre unit [1], applied to the 15-litre masses [2][3]. The foam share of a small tank is probably higher, since a similar layer wraps a smaller tank.
Mg MagnesiumConsumableNot given – –
The Midea unit has a magnesium anode [3]; Havells names only an anode rod with a stainless steel core [2]. No source gives the anode's mass. It wears away and is replaced in service.

as of 2026-11-17

How it is put together

The main steps from parts and materials to the finished unit

StepWhat happensSource
Form and weld the tankSteel sheet is rolled and welded into the tank; one tested brand claims heavy gauge hot-rolled steel sheet with single-line welding [13].[13]
Line the tankThe inside is coated with glass or titanium enamel against rust [3].[3]
Fit the element, thermostat and anodeA resistance heating element, a thermostat and a magnesium anode are fitted to the tank [3].[3]
InsulatePolyurethane foam is placed round the tank; it has replaced glass wool in the brands tested [13].[13]
Close the outer body, test and labelThe outer body is fitted and the unit is tested to the safety standard for storage water heaters [15] and labelled with its BEE star rating [4].[15][4]

as of 2026-11-17

Technologies inside it

The technologies inside the product, with how much of each per unit

Embodies
  • EH Electric heating The element heats by electrical resistance; the working principle is on the technology page.

as of 2026-11-17

Sources

  1. Environmental Product Declaration: SAGA 2.0 S 200 water heater OSO Hotwater AS (programme operator EPD International AB), 2025
  2. Valerio Storage Water Heater (Geyser), 15 L Havells India, 2024
  3. Midea 15 L Storage Water Geyser (MWH15-20MVN1(IN)W, White) Midea India, 2026
  4. Ministry of Power notification S.O. 5776(E) on star labelling of stationary storage type electric water heaters (GeyserNote) Ministry of Power, with the Bureau of Energy Efficiency (copy hosted by BEE), 2022
  5. Geysers: They are becoming better (comparative test of 25-litre storage water heaters) Consumer Voice (hosted by the Department of Consumer Affairs, India), 2013
  6. Water heaters: safety standards (BIS blog) Bureau of Indian Standards, 2022