Material Insights · Understanding the Material World

Electric water heater: Working

What it is

The product and the job it does, in a short paragraph

An electric storage water heater, called a geyser in India, keeps a tank of water hot with an electric element so that hot water is ready for bathing and washing. The functional unit is one 15-litre storage water heater (geyser), the usual wall-mounted size in India. The scope is stationary storage units under HS 8516.10. Instant heaters, immersion rods, gas, solar and heat pump water heaters are left out. Masses are for 15-litre units [2][3].

as of 2026-11-17

How it works

How it does its job, step by step in plain words

Cold water enters the sealed steel tank and hot water leaves from the top, so the hot water stays layered above the cold. An electric resistance element, rated at 2000 W in the units opened, warms the water as current meets resistance [2][3]. A thermostat switches the element off at the set temperature and back on as the water cools. A layer of polyurethane foam around the tank slows heat loss [2][1]. A glass or enamel lining and a magnesium anode, which corrodes in place of the steel, protect the tank [3][2]. The tank is rated for 8 bar, so mains pressure pushes the hot water out [3][2]. Standing loss, the heat that leaks from a full tank over a day, sets the BEE star grade [4].

as of 2026-11-17

Key specifications

The numbers that describe it, each with unit, variant, year and source

SpecValueUnitYearSource
Rated capacity (Havells Valerio and Midea MWH15)15L2026[2][3]
Rated power input2000W2026[2][3]
Rated input current at 230 V (Havells Valerio)8.7A2026[2]
Mass when empty, Havells Valerio 15 L10.8kg2026[2]
Mass, Midea MWH15 15 L (the page does not say empty or packed)9.8kg2026[3]
Rated pressure8bar2026[2][3]
Standing loss ceiling for 5 stars at 15 L0.381kWh/24 hour/45 C2023[4]
Declared standing loss, six of seven 15 L models in a 2022 survey0.419kWh/24 hour/45 C2022[12]
Energy to make 1 L of water at 40 C from cold (European test condition)0.035kWh/L2025[1]

as of 2026-11-17

Limits

The physical limits set by science and the engineering limits of today's design, with today's value

LimitKindLimitTodayUnitSource
Heat needed to warm the water, about 0.035 kWh per litre at 40 C, so 15 L needs about 0.525 kWh (calculated); set by the heat capacity of waterPhysical0.0350.035kWh/L[1]
Standing loss of a 15 L tank, set by insulation thickness and tank size; zero is the ideal, the 5-star ceiling is the best bandEngineering0.3810.381 or less for 5 starskWh/24 hour/45 C[4]
Rated working pressure of the sealed tankEngineering88bar[3][2]

as of 2026-11-17

Science it relies on

The science principles it works by or is limited by

Relies on Limited by

as of 2026-11-17

Sources

  1. Environmental Product Declaration: SAGA 2.0 S 200 water heater OSO Hotwater AS (programme operator EPD International AB), 2025
  2. Valerio Storage Water Heater (Geyser), 15 L Havells India, 2024
  3. Midea 15 L Storage Water Geyser (MWH15-20MVN1(IN)W, White) Midea India, 2026
  4. Ministry of Power notification S.O. 5776(E) on star labelling of stationary storage type electric water heaters (GeyserNote) Ministry of Power, with the Bureau of Energy Efficiency (copy hosted by BEE), 2022
  5. Electric Storage Water Heaters (Geysers) Consumer Voice, 2022