Internal combustion engine: Evolution
Timeline
The milestones of the product, each with a source
| Year | Event |
|---|---|
| 1860 | Etienne Lenoir markets a gas engine in France; it uses about 4% of the fuel's energy [14] |
| 1876 | Nikolaus Otto builds a working four-stroke engine in Germany [14] |
| 1897 | Rudolf Diesel demonstrates an efficiency of 26.2% in a test on 17 February [15] |
| 1975 | From model year 1975 all US cars must carry catalytic converters [18] |
| 2018 | Toyota unveils 2.0 litre petrol engines with 40% peak thermal efficiency, 41% in the hybrid version [16] |
| 2020 | Bharat Stage VI emission norms apply to new cars in India [7] |
| 2024 | Euro 7 is adopted as Regulation (EU) 2024/1257 and applies to new car types from 29 November 2026 [6, 10] |
as of 2026-11-13
Lineage
The products and technologies it evolved from and into
Evolved from- Stm Steam engine Lenoir's 1860 engine was essentially a converted double-acting steam engine that burned gas inside the cylinder [14]; see the twin technology page for the history.
as of 2026-11-13
Recipe changes
How what it is made of changed over time, and what drove each change
| Change | From | To | Driver | Source |
|---|---|---|---|---|
| Cast iron to aluminium engine blocks | Grey cast iron block | Aluminium block (cast aluminium is 39% of today's reference engine) | Weight: a 1.6 litre block differs by 9 kg between iron and aluminium for petrol and 11 kg for diesel [25, 1] | [25, 1] |
| Exhaust catalyst added to the system | No exhaust treatment | Platinum-group metal catalyst on every car | US Clean Air Act of 1970 and the 1975 requirement [18] | [18] |
| Turbocharged direct-injection petrol engines | Naturally aspirated port-injected engine | Gasoline direct injection in 56% and turbocharging in over 44% of new US vehicles | Fuel economy and CO2 rules [12] | [12] |
| Engine efficiency | 4% of fuel energy used (Lenoir, 1860) | 40% peak thermal efficiency (Toyota, 2018) | Higher compression, better combustion and control [14, 16] | [14, 16] |
as of 2026-11-13
What could improve it next
Directions for improvement, today's value and the limit
| Direction | Metric | Today | Unit | Source |
|---|---|---|---|---|
| Higher peak thermal efficiency | Peak thermal efficiency of a production petrol car engine | 40 | % (Toyota 2018; the Carnot limit is not given in the sources) | [16] |
| Hybridisation with a smaller engine | Mass of the reference engine, hybrid versus conventional petrol | 84 | kg for a hybrid versus 104.5 kg for conventional petrol (calculated) | [1] |
| Cut fuel energy lost in the engine | Share of fuel energy reaching the wheels | 25 | % (upper end of 18 to 25% in combined driving) | [17] |
as of 2026-11-13
Sources
- Cradle-to-Grave Lifecycle Analysis of U.S. Light-Duty Vehicle-Fuel Pathways: A Greenhouse Gas Emissions and Economic Assessment of Current (2020) and Future (2030-2035) Technologies Argonne National Laboratory (ANL-22/27), 2022, Tables 26, 29 and 31; sections on powertrain and vehicle lifetime
- Type-approval of motor vehicles and engines with respect to their emissions and battery durability (Euro 7) European Parliament Legislative Observatory, 2024
- Emission Standards: India: On-Road Vehicles and Engines DieselNet, 2023
- EU Commission releases Automotive Package proposals DieselNet, 2025
- The EPA Automotive Trends Report 2025: Fuel Economy and Technology since 1975 (EPA-420-R-26-001) U.S. Environmental Protection Agency, 2026, Section 4, Table 4.1
- Gasoline engine: Development of gasoline engines Encyclopaedia Britannica
- Early History of the Diesel Engine DieselNet, 2019
- Toyota Unveils More New Gasoline ICEs with 40% Thermal Efficiency SAE Mobility Engineering, 2018
- Where the Energy Goes: Gasoline Vehicles U.S. Department of Energy and EPA (fueleconomy.gov)
- Clean Machine Science History Institute, 2015
- Primary Manufacturing, Engine Production and on-the-road CO2: How can the Automotive Industry Best Contribute to Environmental Sustainability? Cranfield University (M.R. Jolly and K. Salonitis), copy on the SinterCast website, Table 9 and the cylinder block section