Material Insights · Understanding the Material World

Internal combustion engine: Bill of materials

About these figures

Which unit, study and year the composition figures describe, and how they vary

Amounts are for the engine of a US midsize sedan in a 2022 Argonne study, current technology: 104.5 kg petrol (gasoline turbo) and 150.5 kg diesel, calculated as car weight x powertrain share (Table 26) x the engine's 54% of the powertrain (Table 29), with material shares from Table 31 [1]. Two links are assumptions: all plastic as polypropylene and all rubber as EPDM. Glass-fibre reinforced plastic (3%, about 3.1 kg petrol) has no node. Turbocharger, fuel injection and spark plugs are not yet nodes.

as of 2026-11-13

Direct materials

The commodities and chemicals in one unit as bought, with amount, mass share, cost share and recycled content

Variant 1 Petrol
MaterialRoleAmount in one unitShare of the unit's mass
St SteelStructural45.98 kg44%
Steel, 44% of the engine's mass in Table 31 (calculated from the engine mass) [1]
Al AluminiumStructural45.98 kg44%
Cast aluminium 39% and wrought aluminium 5% of the engine's mass in Table 31, together 44% (calculated) [1]
PP PolypropyleneStructural5.22 kg5%
The study's 'average plastic', 5% of the engine's mass (calculated). The study does not name the plastic; linking it all to polypropylene is an assumption [1]
Cu CopperFunctional2.09 kg2%
Copper, 2% of the engine's mass in Table 31 (calculated) [1]
EPDM EPDMFunctional2.09 kg2%
Rubber, 2% of the engine's mass (calculated). The study names no rubber type; linking it to EPDM is an assumption [1]
Variant 2 Diesel
MaterialRoleAmount in one unitShare of the unit's mass
St SteelStructural66.22 kg44%
Steel, 44% of the engine's mass in Table 31 (calculated from the engine mass) [1]
Al AluminiumStructural66.22 kg44%
Cast aluminium 39% and wrought aluminium 5% of the engine's mass in Table 31, together 44% (calculated) [1]
PP PolypropyleneStructural7.53 kg5%
The study's 'average plastic', 5% of the engine's mass (calculated). The study does not name the plastic; linking it all to polypropylene is an assumption [1]
Cu CopperFunctional3.01 kg2%
Copper, 2% of the engine's mass in Table 31 (calculated) [1]
EPDM EPDMFunctional3.01 kg2%
Rubber, 2% of the engine's mass (calculated). The study names no rubber type; linking it to EPDM is an assumption [1]

as of 2026-11-13

How it is put together

The main steps from parts and materials to the finished unit

StepWhat happensSource
CastingCylinder blocks are sand cast in grey iron or die cast in aluminium [25]; at Toyota's Deeside plant aluminium is melted and injected at high speed to form cylinder heads and blocks [27][25, 27]
MachiningThe cast parts are machined, along with other engine components [27][27]
AssemblyOver 320 parts are assembled into the engine on an assembly line [27][27]
TestingEvery engine is tested at several stages before it leaves the plant [27][27]

as of 2026-11-13

Technologies inside it

The technologies inside the product, with how much of each per unit

Embodies

as of 2026-11-13

Sources

  1. Cradle-to-Grave Lifecycle Analysis of U.S. Light-Duty Vehicle-Fuel Pathways: A Greenhouse Gas Emissions and Economic Assessment of Current (2020) and Future (2030-2035) Technologies Argonne National Laboratory (ANL-22/27), 2022, Tables 26, 29 and 31; sections on powertrain and vehicle lifetime
  2. Primary Manufacturing, Engine Production and on-the-road CO2: How can the Automotive Industry Best Contribute to Environmental Sustainability? Cranfield University (M.R. Jolly and K. Salonitis), copy on the SinterCast website, Table 9 and the cylinder block section
  3. Deeside Engine Plant Toyota Manufacturing UK