Machine tool: Bill of materials
About these figures
Which unit, study and year the composition figures describe, and how they vary
Figures are two base cases from the EU Lot 5 study of 2012: a 4-axis CNC multifunctional milling centre of 25.8 t and a manually controlled lathe of 1,000 kg [1]. In the milling centre, non-ferrous metal is 0.87 t, mostly copper in the power electronics and motors, and plastic and rubber 70 kg, with no split by metal. Not yet nodes: spindle, ball screws and guides, numerical controller, cooling system, bearings.
as of 2026-11-13
Components
The products inside one unit, with quantity, mass share and cost share
Variant Machining centre| Material | Role | Amount in one unit | Share of the unit's mass |
|---|---|---|---|
| Electric motor | Component | Not given | – |
| The study counts the copper of the electrical motors in the machine's 0.87 t of non-ferrous metal and leaves their iron out of its 24.3 t of cast iron and steel [1]; it gives no motor count or mass. | |||
| Transformer and power converter | Component | Not given | – |
| The study names power electronics (thyristor) whose copper is in the 0.87 t of non-ferrous metal and whose standby draw is part of the 1.5 kW [1]; it gives no count or mass. | |||
as of 2026-11-13
Direct materials
The commodities and chemicals in one unit as bought, with amount, mass share, cost share and recycled content
Variant 1 Machining centre| Material | Role | Amount in one unit | Share of the unit's mass |
|---|---|---|---|
| St Steel | Structural | 24,300 kg | 94.2% |
| Cast iron and steel together weigh 24.3 t of 25.8 t, not counting the iron in the electric motors [1]; the share is calculated. The bill-of-materials table, headed in grams, lists cast iron parts at 16,000,000 g, about 16,000 kg (table value, converted); cast iron has no node of its own. | |||
| Material | Role | Amount in one unit | Share of the unit's mass |
|---|---|---|---|
| St Steel | Structural | 961 kg | 96.1% |
| Table values from the bill of materials of a manually controlled engine and feed shaft lathe, headed in grams: cast iron parts 741,021 g and two steel rows of 110,000 g, about 741 kg of cast iron and 220 kg of steel, 961 kg in all (calculated) of a total weight of 1,000 kg [1]. | |||
as of 2026-11-13
Technologies inside it
The technologies inside the product, with how much of each per unit
Embodies- CNC Numerical control machining 1 numerical control system Machining centre The machining centre is numerically controlled; the manual lathe is not.
as of 2026-11-13
Sources
- Energy-Using Product Group Analysis, Lot 5, Machine tools and related machinery, Task 4 Report: Assessment of Base Case (Schischke, Hohwieler, Feitscher, König, Kreuschner, Wilpert and Nissen) Fraunhofer IZM for the European Commission (DG ENTR), 2012