Material Insights · Understanding the Material World

Machine tool: Working

What it is

The product and the job it does, in a short paragraph

A machine tool shapes metal parts by cutting, drilling, milling, turning or grinding material away, under an operator's hands or numerical control. This node covers the machine itself under the trade headings for metal-removing machine tools, for civil manufacturing. Cutting tools, work-holding, forming presses and additive machines are left out. The functional unit is one machine tool.

as of 2026-11-13

How it works

How it does its job, step by step in plain words

A workpiece is clamped to a table or held in a chuck. A cutting tool, turning in a spindle or held against a rotating part, removes a thin layer at a time. Slides driven by motors and screws move the tool or the part along several axes, and a numerical controller reads a program and drives each axis. A sensor on each axis reports its position, and the controller corrects any error many times a second. A heavy cast-iron or steel frame holds everything rigid, because stiffness decides accuracy. Pumps supply oil and cooling lubricant. Only part of the electricity does cutting work: the EU's modelled 4-axis milling centre draws 25 kW in full operation and 1.5 kW on standby [1].

as of 2026-11-13

Key specifications

The numbers that describe it, each with unit, variant, year and source

SpecValueUnitVariantYearSource
Mass of the 4-axis CNC multifunctional milling centre base case25,800kgMachining centre2012[1]
Cast iron and steel in that machine, not counting the iron in its electric motors24,300kgMachining centre2012[1]
Input power of the real machine in full operation25kWMachining centre2012[1]
Input power in standby (latch mode of the CNC control and power electronics)1.5kWMachining centre2012[1]
Operating time as pure machining time, assumed4400hours per yearMachining centre2012[1]
Life assumed in the study12yearsMachining centre2012[1]
Mass of the typical manually controlled machine tool (lathe) base case1000kgManual lathe2012[1]

as of 2026-11-13

Variants

The variants whose make-up or footprint differs a lot, what defines each and its share of units

VariantDefining specYearSource
Machining centreNumerically controlled 4-axis multifunctional milling centre; 25.8 t, mostly cast iron and steel; 25 kW in full operation2012[1]; no share of units found
Manual latheManually controlled lathe without numerical control; about 1,000 kg of cast iron and steel2012[1]; no share of units found

as of 2026-11-13

Limits

The physical limits set by science and the engineering limits of today's design, with today's value

LimitKindLimitTodayUnitSource
Input power in full operation falls with energy recovery: the real machining centre needs 25 kW against about 30 kW for the modelled machine without recoveryEngineering– 25kW[1]
Standby power of the control and power electronics, drawn for 754 hours a year in the modelEngineering– 1.5kW[1]
Total-energy saving available at the point of least life-cycle cost from the options the EU study tested (upper end of 3 to 5%)Engineering5– %[3]

as of 2026-11-13

Science it relies on

The science principles it works by or is limited by

Relies on
  • Feedback control theory Each axis measures its position and the controller corrects the motor until the tool is where the program says.
Limited by

as of 2026-11-13

Sources

  1. Energy-Using Product Group Analysis, Lot 5, Machine tools and related machinery, Task 4 Report: Assessment of Base Case (Schischke, Hohwieler, Feitscher, König, Kreuschner, Wilpert and Nissen) Fraunhofer IZM for the European Commission (DG ENTR), 2012
  2. Energy-Using Product Group Analysis, Lot 5, Machine tools and related machinery, Task 7 Report: Policy and Impact Analysis Fraunhofer IZM for the European Commission (DG ENTR), 2012