Material Insights · Understanding the Material World

Memory chip: Bill of materials

About these figures

Which unit, study and year the composition figures describe, and how they vary

The amounts come from one study (Williams, Ayres and Heller, 2002) of one chip: a 32 MB DRAM on a 200 mm wafer, 2.0 g packaged, with a 1.2 cm2 die, 1.2 g of copper lead frame and 0.7 g of epoxy [9]. Its text dates the firm data to 2000, used here; its Table 2 labels the same chemical input 'firm 1998'. Modern DRAM and all NAND flash chips differ, and no source opened gives their make-up. Silicon wafers, lead frames and memory modules are not yet nodes.

as of 2026-11-13

Direct materials

The commodities and chemicals in one unit as bought, with amount, mass share, cost share and recycled content

Variant DRAM
MaterialRoleAmount in one unitShare of the unit's mass
Cu CopperStructural1.2 g60%
Copper lead frame of the 2.0 g DRAM chip; mass share calculated (1.2 g of 2.0 g) [9].
EPX Epoxy resinsStructural0.7 g35%
Epoxy package of the 2.0 g DRAM chip; mass share calculated (0.7 g of 2.0 g) [9]. No source opened gives the make-up of a NAND flash chip.
Si SiliconStructural0.256 g–
Wafer silicon input per 32 MB DRAM chip of about 2000 (calculated: 1.6 cm2 of wafer x 0.16 g per cm2), including the wafer area lost to edges; the die in the package weighs about 0.1 g (2.0 g minus copper and epoxy, calculated) [9].

Indicative · as of 2026-11-13. Amounts are for one 32 MB DRAM chip in one 2002 study, using firm data of 2000; modern chips are denser and no later inventory was found.

How it is put together

The main steps from parts and materials to the finished unit

StepWhat happensTechnologySource
Grow and slice the siliconPure silicon crystals are sliced into polished wafers; the 200 mm wafers of the 2002 study took about 2,130 kWh per kg of wafer silicon.Czochralski crystal growth[9]
Print the circuit layersLight through a patterned mask marks each layer on the wafer; Micron's 1-gamma DRAM is its first to use extreme ultraviolet light.Extreme ultraviolet lithography[13]
Test and cut the waferWorking dies are found on the wafer and cut out; about 75% of wafer area ended as working DRAM in the 2002 study.Planar process and photolithography[9]
Package the dieA good die is fixed to a copper lead frame and sealed in epoxy.– [9]
Final test and markingPackaged chips are tested and marked; in India Micron's Sanand plant converts DRAM and NAND wafers from Micron's global fabs into finished products.– [19, 17]
Mount on modules and boardsChips are soldered onto memory modules, drives and device boards.– –

as of 2026-11-13

Technologies used to make it

The technologies used to make it, at which step

Made with

as of 2026-11-13

Technologies inside it

The technologies inside the product, with how much of each per unit

Embodies

as of 2026-11-13

Sources

  1. The 1.7 Kilogram Microchip: Energy and Material Use in the Production of Semiconductor Devices Williams, Ayres and Heller, Environmental Science & Technology (author copy on freedomsolarpower.com), 2002
  2. Micron unveils DDR5-9200 memory: 1γ process technology with EUV Tom's Hardware, 2025
  3. PM inaugurates Micron Technology’s Semiconductor Assembly, Test and Packaging (ATMP) facility in Sanand, Gujarat Prime Minister's Office, India, 2026
  4. Micron Begins Semiconductor Production From $2.75 Bn Sanand Plant Inc42, 2026