Material Insights · Understanding the Material World

Power semiconductor module: Working

What it is

The product and the job it does, in a short paragraph

A power semiconductor module is a sealed package that holds several power transistors and diodes on an insulating ceramic base, wired as switches that turn large electric currents on and off. The functional unit is one 1,200 V silicon carbide power module [10]. The scope is modules of silicon carbide MOSFET chips and of silicon IGBT chips (HS 8541.29, where US customs classes SiC MOSFET modules [39]). Single transistors sold alone, bare chips and whole inverters are left out.

as of 2026-11-17

How it works

How it does its job, step by step in plain words

Each chip in the module is a switch: it blocks voltage when off and carries current when on, and a signal on its gate flips it between the two. The chips are soldered to a ceramic board with copper tracks on both faces, which insulates them electrically yet passes heat to a copper baseplate that is cooled by air or liquid [1]. Wires join the chip tops to the tracks, a plastic frame carries the terminals, silicone gel fills the case and a lid seals it [2]. A six-pack module holds three pairs of switches, one pair for each phase of an electric motor [10]. Silicon carbide withstands about ten times the electric field of silicon and has three times its band gap, which is why it suits high-voltage chips [9].

as of 2026-11-17

Key specifications

The numbers that describe it, each with unit, variant, year and source

SpecValueUnitVariantYearSource
Blocking voltage class of the modules in this scope1200VSiC MOSFET2025[10]
Current ratings of Wolfspeed's 1200 V six-pack modules300, 450, 600 or 700ASiC MOSFET2025[10]
DC current ratings of Infineon's HybridPACK Drive CoolSiC module (1200 V class)200 or 400ASiC MOSFET2021[11]
Internal package inductance of a 800 A, 1200 V all-SiC moduleless than 10nHSiC MOSFET2017[8]
Isolation voltage of the same module4kV ACSiC MOSFET2017[8]
Switching loss of an all-SiC module against a conventional silicon module, as the maker states itabout 80 lower%SiC MOSFET2017[8]
Mass of Infineon's Easy3 B-Series module with SiC76gSiC MOSFET2021[3]
Mass of an Infineon 1200 V EasyPACK CoolSiC MOSFET module (F3L3MR12W3M1H_H11, 200 A nominal)78gSiC MOSFET2025[38]
Mass of Infineon's Easy3B IGBT7 module82gSilicon IGBT2023[5]
Mass of the two reference IGBT power modules of an automotive inverter model (small and large unit)500 and 1260gSilicon IGBT2019[1]

as of 2026-11-17. Ratings are from makers' own pages and are not a survey of the market. Module mass varies several-fold with the package.

Variants

The variants whose make-up or footprint differs a lot, what defines each and its share of units

VariantDefining specYearSource
SiC MOSFETSilicon carbide MOSFET chips, usually with silicon carbide diodes, in a module that blocks 1,200 V; the functional unit2025[10][11]; no source gives a share of module units
Silicon IGBTSilicon IGBT chips with silicon diodes in the same kind of package; the older route that SiC modules are sold to replace2023[5][10]; no source gives a share of module units

as of 2026-11-17. Wolfspeed says its modules can be direct replacements for IGBT-based assemblies in existing inverter housings [10]. No source opened gives the share of module units by variant; Yole gives only growth rates for IGBT modules and revenue for all power modules [37].

Limits

The physical limits set by science and the engineering limits of today's design, with today's value

LimitKindLimitTodayUnitSource
Breakdown field of the chip material, which sets how thin a 1,200 V chip can bePhysical33 for 4H-SiC; 0.3 for siliconMV/cm[9]
Band gap of the chip material, which sets how hot the chip can runPhysical3.263.26 for 4H-SiC; 1.12 for siliconeV[9]
Internal package inductance, which slows switching (lower is better)Engineering– less than 10 in an 800 A, 1200 V modulenH[8]
Survival of repeated heating and cooling (power cycling)Engineering– Maker claim: three times as many cycles at rated temperature as the best-in-class competitor modules with a similar footprintclaim[10]

as of 2026-11-17

Science it relies on

The science principles it works by or is limited by

Relies on
  • Band theory of solids A wide band gap lets silicon carbide block high voltages in a thin chip and run hotter.
  • The p-n junction The diodes and the body of each switch are junctions between differently doped semiconductor layers.
Limited by

as of 2026-11-17

Sources

  1. A scalable life cycle inventory of an automotive power electronic inverter unit, part I: design and composition The International Journal of Life Cycle Assessment (Springer), 2019
  2. A scalable life cycle inventory of an automotive power electronic inverter unit, part II: manufacturing processes The International Journal of Life Cycle Assessment (Springer), 2019
  3. Material Content Data Sheet: Umbrella Spec Easy3 B-Series with SiC Infineon Technologies, 2021
  4. Material Content Data Sheet: Umbrella Spec Easy3B IGBT7 Infineon Technologies, 2023
  5. SiC Power Modules for a Wide Application Range: Innovative Power Devices for a Sustainable Future (Junji Yamada, Mitsubishi Electric) EEPower (Bodo's Power Systems), 2017
  6. What are SiC Semiconductors? ROHM
  7. Wolfspeed Launches 1200 V SiC Six-Pack Power Modules Targeting E-Mobility All About Circuits, 2025
  8. Industry's First Automotive Qualified SiC Six-Pack Power Module for EV Traction Inverters with HybridPACK Drive CoolSiC Embedded Computing Design (Infineon release), 2021
  9. F3L3MR12W3M1H_H11 datasheet: EasyPACK module with CoolSiC Trench MOSFET and PressFIT / NTC (revision 1.20) Infineon Technologies, 2025
  10. Ruling N326041: the tariff classification of SiC MOSFET chip modules from China (US Customs and Border Protection), as reproduced by TariffLens TariffLens, 2022