Material Insights · Understanding the Material World

Printer and copier: Bill of materials

About these figures

Which unit, study and year the composition figures describe, and how they vary

The kilogram figures are Lexmark's 2024 life-cycle assessment of one MX826ADE laser printer, 43.7 kg: ferrous metals 20.7, plastics 19.29, electronics 2.32, glass 1.05 and other 0.273 [1]. Lexmark does not name the polymers; the JRC names polystyrene, ABS and polycarbonate as the common ones [4], so no plastic amount is linked. India's EPR framework gives other metal shares for printers (iron 10, aluminium 1.25, copper 0.01 per cent) and copiers (iron 20, copper 0.1, aluminium 1.15) [13]. No inkjet bill of materials was found; cartridges and the control board are not nodes.

as of 2026-11-13

Direct materials

The commodities and chemicals in one unit as bought, with amount, mass share, cost share and recycled content

Variant Laser
MaterialRoleAmount in one unitShare of the unit's mass
St SteelStructural20.7 kg47.4%
Ferrous metals in one machine, the 43.7 kg Lexmark MX826ADE (Table 1 value); mass share calculated, 20.7 / 43.7 [1]. Stainless steel and cast iron are not separated.
Al AluminiumStructural0.091 kg0.2%
Aluminium in the same machine (Table 1 value); mass share calculated [1]. India's EPR framework lists 1.25% aluminium by weight for 'printers including cartridges', a different basis [13].
Cu CopperFunctional0.045 kg0.1%
Copper in the same machine (Table 1 value); mass share calculated [1].

as of 2026-11-13

How it is put together

The main steps from parts and materials to the finished unit

StepWhat happensSource
Mould the covers and form the framePlastic housings are moulded and sheet metal is cut and formed into the frame.General process; no assembly study was opened
Build the print engineThe drum or print head, fuser or ink path, rollers and motors are fitted into modules.General process; no assembly study was opened
Fit electronicsThe control board, power supply and panel are mounted and wired.General process; no assembly study was opened
Test and packThe finished machine is tested, loaded with its starter consumables and packed.General process; no assembly study was opened

as of 2026-11-13

Technologies inside it

The technologies inside the product, with how much of each per unit

Embodies
  • Xer Xerography (photocopying) 1 engine Laser Laser printers and copiers print by xerography; the Xerox 914 is called the root technology for modern office photocopiers and by extension laser printers [10].

as of 2026-11-13

Sources

  1. Life Cycle Assessment Laser Printer MX826ADE (equivalent models MX826adxe, XM7370) Lexmark International, Inc., 2024
  2. Revision of the EU Green Public Procurement (GPP) Criteria for Imaging Equipment. Technical Report 2.0, Draft criteria Joint Research Centre, European Commission (Kaps et al.), 2019
  3. Light and Static: The Origins of the Xerox Copy The Henry Ford
  4. Framework for generation of EPR Certificate under E-Waste (Management) Rules, 2022 Tamil Nadu Pollution Control Board (hosted copy; the document names no issuer, India Environment Portal credits CPCB [20]), Annexure I