Printer and copier: Interventions
Interventions
Changes that would cut emissions or material use, by lever and life stage, with effect per unit, readiness, adoption, evidence and who acts
| Lever | Life stage | Change | Effect per unit | Readiness | Adoption | Who acts | Source |
|---|---|---|---|---|---|---|---|
| Circularity | Making | Use remanufactured or refilled cartridges instead of new single-use ones | The JRC concludes that remanufactured and refilled cartridges reduce life-cycle impacts significantly, and that consumables made up 20 to 30% of global warming potential in the LCA studies it reviewed; no per-printer figure [4] | Deployed | Lexmark's model assumes 80% of cartridges are remanufactured or recycled | Makers, remanufacturers, buyers | [4][1] |
| Design | Use | Switch to ink tank models for high-volume printing | Epson calculates 1.91 kg of consumables for its representative mono EcoTank against 47.86 kg for the average of major laser competitors over a life print volume of 100,000 (maker's own calculation) | Deployed | IDC reports ink tank models growing in 2026 while overall shipments fell 7% | Makers, buyers | [19][7] |
| Efficiency | Use | Buy ENERGY STAR or Blue Angel machines with low typical electricity consumption and default duplex printing | The criteria set limits in kWh per week by speed band and require automatic duplexing; no saving per unit found [16][17] | Deployed | Not found | Makers, buyers, public procurers | [16][17] |
| Use less | Use | Print less and on both sides, since the JRC calls paper the most important hotspot in the life cycle of printers | No figure per unit; paper is outside the declared totals of the Konica Minolta study [2][4] | Deployed | Not found | Office managers, public procurers | [4][2] |
| Circularity | End of life | Meet India's EPR targets for printers and copiers through registered recyclers | Targets of 60% in 2023-24 rising to 80% by 2027-28; the metals counted for certificates are iron, aluminium and copper [15][13] | Deployed | Rules in force from 1 April 2023 | Producers, recyclers, CPCB | [15][13] |
as of 2026-11-13
Sources
- Life Cycle Assessment Laser Printer MX826ADE (equivalent models MX826adxe, XM7370) Lexmark International, Inc., 2024
- Product Environmental Aspects Declaration, EP and IJ printer, bizhub C3300i (AD-19-E1101) Konica Minolta, Inc., 2019
- Revision of the EU Green Public Procurement (GPP) Criteria for Imaging Equipment. Technical Report 2.0, Draft criteria Joint Research Centre, European Commission (Kaps et al.), 2019
- Ink tank printers buck global market downturn in Q2 Newsbytes.PH, 2026
- Framework for generation of EPR Certificate under E-Waste (Management) Rules, 2022 Tamil Nadu Pollution Control Board (hosted copy; the document names no issuer, India Environment Portal credits CPCB [20]), Annexure I
- E-Waste Management Rules, 2022 International Energy Agency policies database, 2022
- Imaging Equipment Key Product Criteria ENERGY STAR
- Environmentally Friendly Printers and Multifunction Devices (DE-UZ 219), Edition 2021 Blue Angel, 2021
- Calculation methodology for EcoTank's environmental claim Epson (no publisher named on the document), 2021