Material Insights · Understanding the Material World

Processor chip: Interventions

Interventions

Changes that would cut emissions or material use, by lever and life stage, with effect per unit, readiness, adoption, evidence and who acts

LeverLife stageChangeEffect per unitReadinessAdoptionWho actsSource
Use lessUseKeep the phone, and so its chips, in use longerIn one phone, the Fairphone 5, the ICs on the main board were 16.2 of the 32.7 kg CO2e of making it, about 50% (calculated), so each extra year of use spreads that over more time; no source gives the savingDeployedNot statedOwners, makers[7]
DesignComponents designShrink the die and raise yieldApple's A19 Pro die is 6.1% smaller than the A18 Pro (98.6 against 105 mm2 by a secondhand die-shot report, calculated); imec: a 2% yield loss on a large N2 die is about 42 tonnes CO2eDeployedNot statedChip designers, foundries[5][16]
Change routeMakingPrint layers with EUV instead of repeated DUV exposuresimec says moving from 193i to EUV for N7 significantly lowers energy per wafer; no figure givenDeployed at leading nodesASML is the only EUV supplierFoundries, ASML[16][18]
EfficiencyMakingAbate high-warming etch gases (CF4, NF3)Abatement can cut these emissions by a factor of 10DeployedNot statedFoundries, equipment makers[16]
SubstituteComponents designUse an older, coarser node where performance allowsACT model parameters for fab electricity per cm2 are 0.90 kWh at 28 nm against 2.75 kWh at 3 nm, about 3.1 times (calculated); phones lose speed and battery lifeDeployedNot statedChip designers, device makers[6]
CircularityEnd of lifeCollect and recycle e-waste so its gold and copper return22.3% of e-waste was documented as recycled in 2022; no figure for processor chipsDeployed22.3% of e-waste mass, world, 2022Producers, recyclers, regulators[29]

as of 2026-11-13

Sources

  1. Apple A19 Pro die shot showcases smaller profile chip with minimal design changes Notebookcheck (Anil Ganti), 18 November 2025, reporting a die shot posted on X by Kurnal (secondhand), 2025
  2. ACT: Designing Sustainable Computer Systems With An Architectural Carbon Modeling Tool Gupta et al., ISCA '22, 2022, Tables 1 and 7
  3. Life Cycle Assessment of the Fairphone 5 Fairphone, 2024, Table 1-1 (p. 8), Table 5-3 (p. 34), Figure 6-5 and p. 45
  4. How can we reduce environmental impact in chip manufacturing? imec (first published in Semiconductor Digest, July/August 2025 issue), 2025
  5. ASML Annual Report 2025: strategic report ASML Holding N.V., pp. 17, 22
  6. The Global E-waste Monitor 2024 (executive summary) UNITAR and ITU, 2024