Rolling bearing: Footprint
End of life
What happens to a unit when it is thrown away: collection, reuse, recycling and disposal shares, by place
| Route | Share | Place | Year | Source |
|---|---|---|---|---|
| Steel recovered for recycling from machinery at end of life (global estimate) | 90 | World | 2018 | [33] |
| Steel recovered for recycling from automotive at end of life (global estimate) | 85 | World | 2018 | [33] |
| All post-consumer steel recovered for recycling | 83 | World | 2018 | [33] |
| Grinding swarf from SKF's factories recycled or reused | 66 | World | 2025 | [3] |
as of 2026-11-15
Recovered as
The commodities and chemicals recovered at end of life, with recovery rates
Recovered as- St Steel 90% recovered · Recycling Recovery rate for steel in machinery, a sector estimate rather than a bearing figure [33]. Large bearings can instead be remanufactured; Schaeffler states that remanufacturing cuts CO2 emissions by up to 95% and costs 20% to 70% less than a new bearing [34].
as of 2026-11-15
End of life in India
Collection and recycling in India, including the informal sector
No bearing-specific collection or recycling rate was found for India or the world. A bearing leaves with the machine it sits in, and its steel goes to scrap; sector estimates put steel recovery at 90% for machinery and 85% for vehicles [33]. Schaeffler remanufactures bearings up to 4.2 m outside diameter [34]. No Indian rule or figure for bearings at end of life was found.
as of 2026-11-15
Sources
- SKF Annual Report 2025 AB SKF, 2026
- Fact sheet: Steel and raw materials World Steel Association (copy hosted by Australian Steel Institute), 2018
- Schaeffler remanufacturing makes a contribution to environmental protection Schaeffler, 2022