Silicon wafer
A thin polished disc of very pure silicon on which chips or solar cells are made.
Parts and semi-finished goods · No. 82
- Electronic age
A 300 mm silicon wafer weighs only 128 g, yet five companies supply about 75% of the world's wafers.
Chart: Illustration: Silicon wafer
Where it comes from
Chart: Map of where it comes from
Texas Instruments had silicon transistors on sale in 1954. Monsanto set up MEMC in 1959 to make silicon wafers, and wafers 0.75 inch across were available by about 1960. Wafers grew to 300 mm, in chip production since 2001, to cut the cost of each chip.
Three things to know
- A 300 mm wafer is 775 µm thick and weighs 128 g, and one kilogram of polished wafer makes about 7.8 of them.
- Shin-Etsu and SUMCO of Japan held about 44% of wafer sales in a 2025 Nikkei survey, and the top five makers supply about 75% of the market.
- Solar cells take far more silicon than chips: about 1.4 million tonnes of silicon for 706 GWp of cells in 2025, against chip wafers weighing about 15,000 tonnes (both calculated, and not the same measure).
The journey
- 1 Quartz sandReduced with carbon at about 2,000 °C to raw silicon, 98 to 99% pure
- 2 PolysiliconRaw silicon becomes trichlorosilane, is distilled, then deposited as ultra-pure rods
- 3 Single crystalPolysilicon is melted and pulled into a crystal ingot
- 4 WaferThe ingot is sliced, lapped, etched and polished
- 5 Chips or solar cellsCircuits are printed on it, or it is turned into a cell
- 6 ReclaimTest wafers can be repolished and used again