Material Insights · Understanding the Material World

Silicon wafer: Working

What it is

The product and the job it does, in a short paragraph

A silicon wafer is a thin, polished disc of very pure single-crystal silicon, with a trace of boron, phosphorus or another element added to set how it conducts. Chips are built on it layer by layer, and solar cells are made from it. This node covers doped silicon wafers (HS 3818). The functional unit is one 300 mm chip wafer; monocrystalline solar wafers are a variant, given per square M10 wafer of 182 mm. Float-zone, silicon-on-insulator and compound wafers are left out. Wafers are the basis on which chips are produced [31].

as of 2026-11-15

How it works

How it does its job, step by step in plain words

A wafer gives other layers a flat, nearly flawless crystal to sit on. Quartz sand is reduced with carbon at about 2,000 °C to raw silicon that is 98 to 99% pure [12]. The raw silicon is turned into trichlorosilane with hydrogen chloride, distilled to a purity of up to 99.9999999%, and deposited as polysilicon on heated silicon rods in the Siemens process [12]. The polysilicon is melted and pulled into a single crystal by the Czochralski method [11], covered in the twin node. The crystal is ground to size and cut into thin slices with a diamond-coated blade or a steel wire [13]. The slices are lapped flat, etched in a mix of hydrofluoric, nitric and acetic acids, and polished with a pad and slurry until one face is highly reflective and free of damage [13]. Chip makers then print circuits on the face; solar makers texture and coat it to make a cell.

as of 2026-11-15

Key specifications

The numbers that describe it, each with unit, variant, year and source

SpecValueUnitVariantYearSource
Diameter300mm (tolerance 0.10)Chip wafer– [14]
Thickness775µm (tolerance 25)Chip wafer– [14]
Mass of one wafer128gChip wafer2013[6]
Wafers from one kilogram of polished wafer7.815wafersChip wafer2013[6]
Area of one face (calculated from the diameter)706.9cm2Chip wafer– [14]
Purity of the trichlorosilane that feeds polysiliconup to 99.9999999%Chip wafer– [12]
Size of an M10 wafer (G12 is 210 x 210 mm)182 x 182mmSolar wafer2026[36]
Area of one M10 wafer (calculated from 182 x 182 mm; G12 is 441 cm2)331.2cm2Solar wafer2026[36]
Thickness of monocrystalline wafer170µmSolar wafer2020[7]
Thickness of thinner wafers cut with diamond wire140µmSolar wafer2026[8]
Silicon used per watt of solar cell2g per WpSolar wafer2024[8]
Silicon in one M10 wafer of 170 µm (calculated: 595.2 g per m2 of total silicon demand times 170 of 255.5 µm sliced, times 0.0331 m2)13.1gSolar wafer2020[7][36]
Kerf loss when sawing solar wafers49µmSolar wafer2025[36]

as of 2026-11-15

Variants

The variants whose make-up or footprint differs a lot, what defines each and its share of units

VariantDefining specYearSource
Chip waferPolished or epitaxial disc, 300 mm (also 200 mm), 775 µm thick, about 128 g; the unit of this node2025No split of SEMI's 12,973 million sq in by diameter or use was found in a source that opened [1]
Solar waferMonocrystalline, square, about 140 to 170 µm thick, sold by the watt of cell; given here per M10 wafer (182 x 182 mm, 331 cm2); a G12 wafer (210 x 210 mm) has 1.33 times the area (calculated)2025Wafer-based silicon was about 98% of 2025 solar production [8]; mono-Si 690 of 706 GWp [8]; formats [36]

as of 2026-11-15

Limits

The physical limits set by science and the engineering limits of today's design, with today's value

LimitKindLimitTodayUnitSource
Diameter of wafers in production (450 mm was planned to follow 300 mm but is not in production)Engineering– 300mm[1][25]
Diameter of Czochralski crystals the method has reachedEngineering460300mm[11][1]
Diameter of float-zone crystals, state of the artEngineering200200mm[11]
Thickness of thinner monocrystalline solar wafersEngineering– 140µm[8]
Silicon used per watt of solar cellEngineering– 2g per Wp[8]

as of 2026-11-15

Science it relies on

The science principles it works by or is limited by

Relies on
  • Band theory of solids Doping shifts the silicon's energy bands, which is what lets a wafer be turned into transistors and diodes.
  • Photovoltaic effect A solar wafer works because light frees charges in the silicon, which a junction then separates.
Limited by
  • Dislocations in crystals Crystal faults called dislocations ruin devices, so growth is controlled to keep the crystal nearly flawless.

as of 2026-11-15

Sources

  1. SEMI reports 2025 annual worldwide silicon wafer shipments and revenue results SEMI, 2026
  2. Schaffung einer Datenbasis zur Ermittlung ökologischer Wirkungen der Produkte der Informations- und Kommunikationstechnik (IKT), Teilvorhaben C (UBA TEXTE 82/2013), section 6.3.1 Umweltbundesamt (Prakash, Liu, Schischke and Stobbe; Öko-Institut and Fraunhofer IZM), 2013
  3. Life Cycle Inventories and Life Cycle Assessments of Photovoltaic Systems (Report IEA-PVPS T12-19:2020) IEA PVPS Task 12, 2020
  4. Photovoltaics Report Fraunhofer Institute for Solar Energy Systems ISE, 2026
  5. Production of Si single crystals (Waferherstellung von MicroChemicals GmbH) MicroChemicals
  6. From quartz sand to high-purity silicon MicroChemicals
  7. Silicon wafer production MKS Instruments
  8. 300mm Silicon Wafer (product sheet SV031) Silicon Valley Microelectronics
  9. Shift to larger diameter silicon wafers (Part 3); reasons and history Sekorm, 2025
  10. Regionalized life cycle assessment of silicon wafers supply chains in the semiconductor industry Circular Economy and Sustainability (Ahmed et al.), ORBi record, 2025
  11. International Technology Roadmap for Photovoltaics (ITRPV): Results 2025, Seventeenth Edition VDMA Photovoltaics Equipment (copy hosted by QualEnergia.it), 2026