Dislocations in crystals
Metals bend and harden because line defects move through their crystals.
Physics · Solid-state physics · No. 59
- Electrical and chemical age
- Science
A perfect metal crystal should resist shearing 100 to 1,000 times better than real crystals do; tiny line flaws called dislocations explain why it does not.
Chart: Illustration: Dislocations in crystals
Where it comes from
Chart: Map of where it comes from
Metals bent at stresses far below what theory said perfect crystals could stand. In 1934 three scientists, Egon Orowan, Geoffrey Ingram Taylor and Michael Polanyi, proposed separately that a moving line defect explains the gap.
Three things to know
- A simple estimate puts the shear strength of a perfect crystal at about 10 GPa, while measured values are 10 to 100 MPa, two to three orders of magnitude lower.
- Dislocations were thought up in 1934 by reasoning, before anyone had seen one; moving dislocations were first watched in an electron microscope in 1956.
- Foreign atoms dissolved in a metal harden it by getting in the way of moving dislocations.
The journey
- 1 PuzzleMetals yield at stresses far below what perfect crystals should bear
- 2 IdeaOrowan, Taylor and Polanyi propose the dislocation, 1934
- 3 TheoryJ. M. Burgers works out the stress fields around dislocations, 1939
- 4 ProofDislocations are verified by experiment in 1947 and first seen moving in an electron microscope in 1956
- 5 Use todayDesigning alloys, steels and heat treatments for strength and toughness