Dislocations in crystals: The idea
In plain words
The idea explained without jargon
In a metal crystal, atoms sit in neat rows. To bend the metal for good, one layer of atoms must slide over the next. Sliding a whole layer at once would take enormous force: a simple estimate gives about 10 GPa, yet real crystals yield at 10 to 100 MPa [2]. The answer is a flaw called a dislocation, the edge of an extra half-row of atoms. Under stress the dislocation moves through the crystal one row at a time, so only a few bonds break at any moment [2]. As a metal is worked, dislocations multiply and tangle, which makes it harder; foreign atoms dissolved in the metal block them too, which is why many alloys are stronger than pure metals [2].
as of 2026-11-11
Key equation
The equation that sums it up, and what each symbol means
- Equation
- tau = tau_0 + A G b sqrt(rho)
- Symbols
- {"tau":"the shear stress needed to keep the metal flowing, in pascals","tau_0":"the stress needed with no other dislocations in the way, in pascals","A":"a constant, found to lie between 0.3 and 0.6","G":"the shear modulus, the metal's stiffness in shear, in pascals","b":"the Burgers vector, the size of the slip step a dislocation makes, in metres","rho":"the dislocation density, the length of dislocation line per volume, in metres per cubic metre"}
- Note
- The more dislocations a metal holds, the more they get in each other's way, so the stress to deform it grows with the square root of their density [2]. A perfect crystal would instead need about G/2 pi, around 10 GPa [2].
as of 2026-11-11
An analogy
A picture from everyday life that makes the idea easier to hold
Moving a large rug by dragging it is hard, but pushing a ruck along it is easy: the rug shifts a little at a time. A dislocation is that ruck in a crystal. The picture stops being true because a crystal has many slip planes, and rucks crossing each other jam, which is just how metals harden.
as of 2026-11-11
Sources
- 6.2: Dislocation Basis of Yield and Creep David Roylance, MIT, Mechanics of Materials, on Engineering LibreTexts