Material Insights · Understanding the Material World

Solar PV module

A weatherproof panel of solar cells wired together.

Energy equipment · No. 25

  • Electronic age
Energy equipment · Product

A 570 W module sold for about $57 in 2025, and a silicon PV system in Sicily pays back the energy used to make it in about a year.

Chart: Illustration: Solar PV module

Where it comes from

Chart: Map of where it comes from

Sharp began mass-producing standard silicon modules in 1963, and one powered a lighted buoy in Yokohama that May. World module output passed 500 kW in 1977, and ARCO Solar launched the first commercial thin film module in 1986.

Three things to know
  1. About 96% of solar modules and their components came from Asia in 2025, and the ten largest makers shipped about 85% of volume in 2024.
  2. Glass is roughly 74% of the mass of a double-glass TOPCon module, and aluminium frames are on about 92% of modules.
  3. India had listed about 228.5 GW of module capacity by September 2026 and has enough operating capacity to make three times the panels it installed in 2025.
The journey
  1. 1 CellsSilicon cells made from polysilicon wafers, mostly in China
  2. 2 Glass and frameGlass is about three quarters of a module's mass; an aluminium frame adds about a tenth
  3. 3 LaminationCells are wired, sealed in plastic film between glass and a backsheet or second glass
  4. 4 InstallationModules go onto solar parks and roofs; 698 GW were installed in 2025
  5. 5 End of lifeGlass, frame and junction box are recycled today; cells mostly are not

Try this in What if Switch on levers and see what changes in India by 2036.

Covered in Thinking in estimates: units, scaling and educated guessingEngineeringCost, trade-offs and resources: why the best design is rarely the strongestEngineering
Go deeper pick a tab to open it in full