Solar PV module: Bill of materials
About these figures
Which unit, study and year the composition figures describe, and how they vary
Masses are for TOPCon modules made in Vietnam by Boviet, from a 2024 EPD: a 32 kg double-glass model (550 to 590 W) and a 23 kg backsheet model (450 to 490 W). Table 4-2 sums to about 98.7%; it also lists a soldering flux (isopropanol, 2.9 and 3.9%), not linked here, and no junction box mass for these models. Junction boxes, backsheets, encapsulant films and frames are not product nodes; they are listed as new products. [4]
as of 2026-11-13
Components
The products inside one unit, with quantity, mass share and cost share
Variant 1 Double glass| Material | Role | Amount in one unit | Share of the unit's mass | Share of cost |
|---|---|---|---|---|
| Solar PV cell | Component | 570 W | 2.1% | 53.3% |
| Cells rated about 570 W in total (the module's rated power; cell power before assembly losses is slightly higher), in a 6 x 24 half-cut layout. Mass share is the EPD's 'Cells (Si)' row, 2.1% [4]. Cost share 53.3% is calculated from the polysilicon, wafer and cell steps (USD 0.096 of USD 0.180 per Wp) in one IRENA case, TOPCon made wholly in Viet Nam, 2025 [19] | ||||
| Flat glass sheet | Component | Not given | 74.4% | – |
| Glass on both faces, 74.4% of a 32 kg, 2.583 m2 module, about 23.8 kg (calculated) [4] | ||||
| Material | Role | Amount in one unit | Share of the unit's mass | Share of cost |
|---|---|---|---|---|
| Solar PV cell | Component | 470 W | 2.4% | 53.3% |
| Cells rated about 470 W in total, in a 6 x 20 half-cut layout; 'Cells (Si)' 2.4% of mass [4]; cost share from the same single Viet Nam case, which does not separate rear-cover types [19] | ||||
| Flat glass sheet | Component | Not given | 67% | – |
| Front glass, 67.0% of a 23 kg module, about 15.4 kg (calculated) [4] | ||||
as of 2026-11-13
Direct materials
The commodities and chemicals in one unit as bought, with amount, mass share, cost share and recycled content
Variant 1 Double glass| Material | Role | Amount in one unit | Share of the unit's mass |
|---|---|---|---|
| Al Aluminium | Structural | 3.2 kg | 10% |
| Frame, 10.0% of 32 kg (calculated) [4]; frames average 4.8 g/W across industrial modules, and steel frames are between 8 and 11 g/W [16] | |||
| LLDPE Polyethylene (LDPE, LLDPE) | Functional | 2.5 kg | 7.8% |
| Encapsulant films, POE 3.9% plus EVA 3.9% of 32 kg (calculated) [4]. There is no node for EVA or POE; both are ethylene copolymers, so they are linked to polyethylene as the closest node, which overstates pure polyethylene | |||
| Sn Tin | Functional | 0.26 kg | 0.8% |
| Solder on the ribbons, 0.8% of 32 kg (calculated) [4] | |||
| Sil Silicones | Functional | 0.22 kg | 0.7% |
| Edge and junction box sealant, 0.7% of 32 kg (calculated) [4] | |||
| Material | Role | Amount in one unit | Share of the unit's mass |
|---|---|---|---|
| Al Aluminium | Structural | 2.5 kg | 10.9% |
| Frame, 10.9% of 23 kg (calculated) [4] | |||
| LLDPE Polyethylene (LDPE, LLDPE) | Functional | 2.1 kg | 9% |
| Encapsulant films, POE 4.5% plus EVA 4.5% of 23 kg (calculated); linked to polyethylene as the closest node, as above [4] | |||
| PET PET resin | Functional | 0.83 kg | 3.6% |
| Polymer backsheet (a polyester, formula (C10H8O4)n), 3.6% of 23 kg (calculated) [4] | |||
| Sn Tin | Functional | 0.21 kg | 0.9% |
| Solder, 0.9% of 23 kg (calculated) [4] | |||
| Sil Silicones | Functional | 0.21 kg | 0.9% |
| Sealant, 0.9% of 23 kg (calculated) [4] | |||
as of 2026-11-13
Cost breakdown
The share of the unit's cost in each component or stage
| Part | Share of cost | Year | Source |
|---|---|---|---|
| Polysilicon, wafer and cell steps (cells) | 53.3% | 2025 | Calculated from USD 0.096 of USD 0.180 per Wp; one IRENA case, TOPCon made wholly in Viet Nam, rear cover not stated [19] |
| Module step (assembly with glass, frame, junction box and other materials, labour and overheads) | 46.1% | 2025 | Calculated from USD 0.083 of USD 0.180 per Wp, same single case [19] |
as of 2026-11-13
How it is put together
The main steps from parts and materials to the finished unit
| Step | What happens | Source |
|---|---|---|
| String the cells | Half-cut cells are soldered into strings with tin-coated ribbon, then the strings are joined. | [4] |
| Lay up | Front glass, encapsulant film, cell strings, a second film and the backsheet or rear glass are stacked in order. | – |
| Laminate | The stack is heated and pressed in a vacuum so the films melt, seal the cells and bond to the glass. | – |
| Frame and seal | An aluminium frame (or steel, or none) is fitted around the edge with silicone sealant. | [10, 16] |
| Fit the junction box | The box with bypass diodes and cables is glued over the rear contacts. | – |
| Test and sort | Each module is flash-tested for power, checked for defects and packed. | – |
as of 2026-11-13
Technologies inside it
The technologies inside the product, with how much of each per unit
Embodies- PV Solar photovoltaics 570 W Double glass A 570 W module embodies photovoltaic conversion; the working principle is on the technology page [4]
- PV Solar photovoltaics 470 W Backsheet A 470 W module [4]
as of 2026-11-13
Sources
- Environmental Product Declaration: Boviet Monocrystalline Photovoltaic Module (PERC and TOPCon cells), EPDITALY0800 EPDItaly (programme operator), for Boviet Solar Technology, 2024
- International Technology Roadmap for Photovoltaics (ITRPV): Results 2025, Seventeenth Edition VDMA Photovoltaics Equipment (copy hosted by QualEnergia.it), 2026
- Comparative evaluation of industrial PV modules on material usage and environmental impacts with different module and frame types Asia-Pacific Solar Research Conference, Sydney, 3 to 5 December 2024 (paper file M. Kim on apvi.org.au), 2024
- Solar PV Supply Chain Cost Tool: Methodology, results and analysis International Renewable Energy Agency (IRENA), copy hosted by the Clean Energy Ministerial, 2026