Material Insights · Understanding the Material World

Steam turbine: Evolution

Timeline

The milestones of the product, each with a source

YearEvent
1884Charles Parsons completes a 4 kW turbine-driven generator turning at 18,000 rpm in Newcastle [24][25].
1887Parsons makes turbo-generator serial no. 168, used for a ship's electric lighting plant and one of the earliest axial-flow units [35].
1888About 200 Parsons sets are in service, mainly for lighting ships [25][26].
1890Forth Banks power station in Newcastle becomes the first public station to use a steam turbine generator [26][25].
1891Parsons supplies his first condensing turbine to the Cambridge Electric Lighting Company [26].
1900Land turbines have grown from 4 kW in 1884 to 1,000 kW [25].
2015A US consortium ends 15 years of work on nickel alloys for steam up to 760 degrees C [16].
2022The 1,350 MW Pingshan Phase II unit in China measures 49.37% net efficiency (lower heating value) in its acceptance test [15].
2025Steam turbine orders reach 588 units and 115,545 MW, with combined-cycle orders doubling [1].

as of 2026-11-15

Lineage

The products and technologies it evolved from and into

Evolved from
  • Stm Steam engine Parsons promoted the turbine as a smaller, more efficient alternative to the reciprocating steam engine [24].

as of 2026-11-15

Recipe changes

How what it is made of changed over time, and what drove each change

ChangeFromToDriverSource
Unit output4 kW (1884)Up to 1,200 MW for coal and gas plants; nuclear sets for reactors up to 1,900 MWNot stated in the sources[25][9][13]
Efficiency of large condensing turbinesMid-teens per centUp to 48%Higher steam pressure and temperature and reheat; EPA reports the history without detailed causes[4]
Main and reheat steam temperature566 degrees C (subcritical 612 MW design in the same US study)593 to 600 degrees C, reheat to 630 degrees CHigher temperatures raise efficiency but need higher-grade materials [4][5][9][4]
Rotor steel for condensing turbines1Cr-Mo-V (strong in creep, poor toughness at low temperature)Ni-Cr-Mo-V grades, with a new heat treatment to combine creep strength and toughnessCondensing turbines need toughness at low temperature [23][23]

as of 2026-11-15

What could improve it next

Directions for improvement, today's value and the limit

DirectionMetricTodayLimitUnitSource
Hotter steam with nickel alloysMain steam temperature600760 targeted by the US advanced ultrasupercritical programme (a materials target, not a physical limit)degrees C[16][15]
Higher efficiency of coal unitsNet efficiency, best unit (LHV)49.3755 to 60%, the EPA's stated aim for improved ultra-supercritical turbines (not a physical limit)%[15][4]
Larger single machinesRated output of the largest utility range1200Not found in sources; nuclear sets already suit reactors of up to 1,900 MWMW[9][10][13]

as of 2026-11-15

Sources

  1. Is Steam the Answer to the Gas Turbine Bottleneck? (2025 orders, Dora Partners and McCoy Power Reports data) Turbomachinery International, 2026
  2. Catalog of CHP Technologies, Section 4: Technology Characterization, Steam Turbines US Environmental Protection Agency, CHP Partnership, 2015
  3. Cost and Performance Baseline for Fossil Energy Plants, Volume 1a: Bituminous Coal (PC) and Natural Gas to Electricity, Revision 3 US DOE National Energy Technology Laboratory, 2015
  4. Steam Turbines for Thermal Power Plants (Up to 1,200 MW) Mitsubishi Heavy Industries, Mitsubishi Power
  5. Steam Turbine Generators (brochure) Toshiba Energy Systems
  6. Arabelle turbine for large reactors Arabelle Solutions
  7. China's Pingshan Phase II Sets New Bar as World's Most Efficient Coal Power Plant POWER Magazine, 2023
  8. Materials Matter: The Advanced Ultrasupercritical Boiler Consortium Power Engineering, 2016
  9. Development of New Heat Treatment Method to impart high creep strength and high toughness to rotor material for condensing steam turbine (Jain, Tsurusaki, Ikeno, Terada, Morioka) Turbomachinery Laboratory, Texas A&M Engineering Experiment Station, 2018
  10. Parsons' steam turbine generator, 1884 Science Museum Group Collection
  11. C. A. Parsons Grace's Guide to British Industrial History
  12. Forward Thinkers: Sir Charles Parsons, inventor of the steam turbine Institution of Mechanical Engineers (IMechE), 2022
  13. Parsons axial-flow turbine unit, serial no. 168, 1887 (collection item 407841) Museums Victoria