Syringe: Bill of materials
About these figures
Which unit, study and year the composition figures describe, and how they vary
The only parts table found is for one 50 ml Luer-Lock syringe (BD Plastipak) in a Dutch intensive care study (2022): polypropylene plunger rod and barrel, a bromobutyl rubber stopper and plastic and paper packaging, 33.4 g in all [6]. It is not representative: small 2 ml to 10 ml syringes weigh far less. A needle is not included; needles are a separate product, not yet a node.
as of 2026-11-13
Direct materials
The commodities and chemicals in one unit as bought, with amount, mass share, cost share and recycled content
| Material | Role | Amount in one unit | Share of the unit's mass |
|---|---|---|---|
| PP Polypropylene | Structural | 28.2 g | 84.4% |
| Plunger rod 11.0 g and barrel 17.2 g of one 50 ml Luer-Lock syringe; sum and share of 33.4 g calculated [6]. | |||
| LLDPE Polyethylene (LDPE, LLDPE) | Consumable | 0.8 g | 2.4% |
| Low-density polyethylene is 80% of the 1.0 g plastic packaging film; share of 33.4 g calculated [6]. | |||
| PA Nylon (PA6, PA66) | Consumable | 0.2 g | 0.6% |
| Polyamide 6 is 20% of the 1.0 g plastic packaging film; share of 33.4 g calculated [6]. | |||
Indicative · as of 2026-11-13. One syringe only: the only parts table found is for a 50 ml Luer-Lock ICU syringe (BD Plastipak) in a Dutch thesis, which is far heavier than the 2 ml to 10 ml syringes most often used, so the amounts are not representative. Its bromobutyl rubber stopper (3.2 g) and paper packaging (1.0 g) have no node [6].
Sources
- Reducing the environmental impact of syringes in the Intensive Care Unit TU Delft (master thesis, Margot Honkoop), 2022, Table 4 and section 6.2