Washing machine: Bill of materials
About these figures
Which unit, study and year the composition figures describe, and how they vary
The materials follow the 5 kg machine of the Lot 14 study (2007), 74.2 kg in total, as printed in the 2015 EU preparatory study [2]; the 2015 base case is 7 kg and 69.6 kg [1]. Concrete is nearly a quarter of the mass. The inventory also lists 1.761 kg of chromium, 1.773 kg of glass and 1.573 kg of wood, not linked here. Drain pump, inlet valve and heating element are not yet products here. Top-load and semi-automatic machines are lighter [20][21]; no inventory found.
as of 2026-11-16
Components
The products inside one unit, with quantity, mass share and cost share
| Material | Role | Amount in one unit | Share of the unit's mass |
|---|---|---|---|
| Electric motor | Component | Not given | – |
| Every machine has one drive motor: a direct-drive inverter motor in the LG front-load [19], a 420 W motor in the Whirlpool semi-automatic [21]. Quantity is left empty on purpose: the Lot 14 inventory lists the materials of the whole machine, so the motor's steel, copper and aluminium are already in the materials below and must not be counted again through the motor page. IFB began making brushless motors for front-load machines in 2024-25 [15] | |||
| Printed circuit board | Component | Not given | 0.4% |
| The board node counts boards by area and no source gives a machine's board area, so quantity is empty. Printed wiring boards were 0.4% of the average washing machine in a UNEP (2013) composition table [2]; the Lot 14 5 kg machine lists 165 g of electronics, boards, switches and lamp, which are not in the materials below [2] | |||
as of 2026-11-16
Direct materials
The commodities and chemicals in one unit as bought, with amount, mass share, cost share and recycled content
| Material | Role | Amount in one unit | Share of the unit's mass |
|---|---|---|---|
| St Steel | Structural | 32.361 kg | 43.6% |
| All ferrous metal of the 5 kg machine of the Lot 14 study (ENEA/ISIS 2007), 74.225 kg in total, as listed in Table 4.13 of the 2015 EU preparatory study [2]; mass share calculated: cast iron 6.214 kg, iron 4.978 kg, stainless steel 2.503 kg (1.939 plus 0.564 kg sheet), steel 12.521 kg and steel strip 6.145 kg. The 2015 base case (7 kg, 69.6 kg) lists 28.527 kg of ferrous metals [1]. UNEP (2013) gives iron and steel 52.1% plus stainless 1.9% [2] | |||
| PP Polypropylene | Structural | 7.935 kg | 10.7% |
| PP 5.402 kg plus PP-K40 2.533 kg (calculated sum; PP-K40 is a filled grade, so its polymer content is lower) in the 5 kg machine of the Lot 14 study (ENEA/ISIS 2007), 74.225 kg in total, as listed in Table 4.13 of the 2015 EU preparatory study [2]; mass share calculated. All plastics there total 12.434 kg, including 1.675 kg of EPDM rubber and 1.037 kg of other plastics [2]. The 2015 base case gives 5.982 kg bulk and 6.457 kg technical plastics with no polymer split [1] | |||
| Al Aluminium | Functional | 2.233 kg | 3% |
| Aluminium 1.503 kg plus sheet 0.001 kg plus casting 0.729 kg (calculated sum) in the 5 kg machine of the Lot 14 study (ENEA/ISIS 2007), 74.225 kg in total, as listed in Table 4.13 of the 2015 EU preparatory study [2]; mass share calculated. UNEP (2013) gives 3.1% [2] | |||
| EPDM EPDM | Functional | 1.675 kg | 2.3% |
| EPDM rubber (listed under plastics) in the 5 kg machine of the Lot 14 study (ENEA/ISIS 2007), 74.225 kg in total, as listed in Table 4.13 of the 2015 EU preparatory study [2]; mass share calculated; used for seals and hoses in washing machines generally | |||
| Cu Copper | Functional | 1.217 kg | 1.6% |
| Copper wire 0.348 kg plus other copper 0.869 kg (calculated sum) in the 5 kg machine of the Lot 14 study (ENEA/ISIS 2007), 74.225 kg in total, as listed in Table 4.13 of the 2015 EU preparatory study [2]; mass share calculated, motor windings included. UNEP (2013) gives 1.2% [2] | |||
| ABS ABS | Structural | 1.145 kg | 1.5% |
| ABS in the 5 kg machine of the Lot 14 study (ENEA/ISIS 2007), 74.225 kg in total, as listed in Table 4.13 of the 2015 EU preparatory study [2]; mass share calculated | |||
| PVC PVC | Structural | 0.221 kg | 0.3% |
| PVC in the 5 kg machine of the Lot 14 study (ENEA/ISIS 2007), 74.225 kg in total, as listed in Table 4.13 of the 2015 EU preparatory study [2]; mass share calculated | |||
| PC Polycarbonate | Structural | 0.19 kg | 0.3% |
| PC 0.188 kg plus glass-reinforced PC 0.002 kg (calculated sum) in the 5 kg machine of the Lot 14 study (ENEA/ISIS 2007), 74.225 kg in total, as listed in Table 4.13 of the 2015 EU preparatory study [2]; mass share calculated | |||
| Cem Cement | Structural | Not given | – |
| The counterweight is 18.180 kg of concrete in the 5 kg machine of the Lot 14 study (ENEA/ISIS 2007), 74.225 kg in total, as listed in Table 4.13 of the 2015 EU preparatory study [2], or 24.5% of its mass (calculated); UNEP (2013) gives concrete as 23.8% of the average machine [2]. The study gives no concrete mix, so the cement in it is unknown and amount and mass share are left empty rather than put the whole concrete mass on cement. Cast iron or steel can be used instead [2][24] | |||
as of 2026-11-16
How it is put together
The main steps from parts and materials to the finished unit
| Step | What happens | Technology | Source |
|---|---|---|---|
| Make the steel cabinet and the tub parts | Sheet and strip steel become the cabinet, frame and drum; some designs use stainless steel in the tub | – | [2][24] |
| Mould the plastic parts | Bulk and technical plastics, mostly polypropylene, are moulded into the tub and other parts | – | [1][2][24] |
| Make the counterweights | Concrete or cast iron blocks are made to be bolted to the tub | – | [2][24] |
| Fit the drum, tub, motor and suspension | The drum sits in the tub, which hangs on the frame; the motor turns the drum, in direct-drive designs without a belt | Electric motors and drives | [2][19] |
| Add the pump, valves, wiring and control board | Pump, inlet valve, heater, cables and the electronic board are fitted and wired; EU rules list these among the spare parts makers must supply | – | [2][4] |
| Finish and pack | Finished machines are packed for dispatch; Godrej describes its Shirwal line for front-load machines in India as fully automated | – | [14] |
as of 2026-11-16
Technologies inside it
The technologies inside the product, with how much of each per unit
Embodies- Mot Electric motors and drives 1 One drive motor per machine, brush, inverter-driven or permanent magnet type [2][19]
- PE Transformers and power electronics Inverter-driven brushless motors, applied in the medium to upper price segments, need power electronics on the control board [2]; LG lists an inverter direct-drive motor [19]
as of 2026-11-16
Sources
- Ecodesign and Energy label revision: Household Washing machines and Washer-dryers, Tasks 5 to 7 (base case and life-cycle assessment) European Commission Joint Research Centre, with Oeko-Institut and the University of Bonn, 2015
- Ecodesign and Energy label revision: Household Washing machines and washer-dryers, preparatory study (input for the first technical working group meeting, 24 June 2015) European Commission Joint Research Centre, with Oeko-Institut and the University of Bonn, 2015
- Commission Regulation (EU) 2019/2023 of 1 October 2019 laying down ecodesign requirements for household washing machines and household washer-dryers (copy on legislation.gov.uk) European Commission, 2019
- Godrej Appliances unveils fully automated manufacturing line for AI powered Front Load Washing Machines Godrej Enterprises Group, 2024
- IFB Industries Ltd, 49th annual report 2024-25 IFB Industries Ltd, 2025
- LG 8 kg front-load washing machine with Inverter DirectDrive (FHB1208Z2M), India product page LG Electronics India, 2026
- LG 8 kg top-load washing machine with Smart Inverter Motor (T80AJMB1Z), India product page LG Electronics India, 2026
- Whirlpool 7.5 kg 5 star semi-automatic washing machine Magic Clean 30291, product page Croma, 2026
- Life cycle assessment analysis of design variants for automatic washing machines Oeko-Institut, 2021