Joule-Thomson effect: Technologies
Technologies
The technologies that rely on it, and how each one uses it
Relied on by 7- HP Heat pumps, air conditioning and refrigeration Letting the refrigerant expand through a valve cools it before it re-enters the cold coil.
- LAES Liquid air storage Liquefiers cool compressed air by expanding it, and feed the chilled gas back to pre-cool the incoming air until part of it turns liquid, as Linde's process did.
- LNG LNG chain Liquefaction plants cool natural gas with refrigerant loops whose expansion valves use the effect to reach very low temperatures.
- Cold LNG cold and cryogenic recovery Plants that use the cold of regasifying LNG to liquefy air or other gases still finish the cooling by letting the pre-cooled gas expand through a valve, as in Linde's process.
- BOS Basic oxygen steelmaking The cheap tonnage oxygen the process needs comes from air liquefied by compressing it and letting it expand, the method Linde used in 1895.
- H2T Hydrogen and hydrogen carriers Liquefiers cool hydrogen partly by letting compressed gas expand, the cooling Thomson observed in 1852; reaching minus 253 °C takes energy equal to 30 to 36% of the hydrogen's content.
- TX Pressure and flow recovery Expanding a fluid across a valve can cool it; making the gas do work in an expander cools it further, which is why expanders are used in refrigeration cycles.
as of 2026-11-11