Basic oxygen steelmaking
Pure oxygen blown onto molten iron makes a batch of steel in about 40 minutes.
Making materials · Metals · No. 26
- Electronic age
- Readiness 9 of 9
- Process
A jet of pure oxygen turns a converter full of molten iron into steel in under 40 minutes, and makes most of the world's steel.
Chart: Illustration: Basic oxygen steelmaking
Where it comes from
Chart: Map of where it comes from
Robert Durrer showed in the laboratory in the early 1940s that pure oxygen could refine iron. Pilot tests followed in Switzerland in 1947, and the first works converter started in Linz, Austria, in 1952.
Three things to know
- The process needs no outside fuel: burning the carbon and silicon in the iron supplies the heat, which is why scrap can be added to cool it.
- A converter can take only about 30% scrap, against up to 100% in an electric arc furnace, so it depends on fresh iron from a blast furnace.
- In 2025 oxygen converters made 69.4% of world crude steel, and in China the share was 89.4%.
The journey
- 1 Ore and cokeA blast furnace smelts iron ore into molten pig iron
- 2 ChargeSteel scrap and molten iron are poured into the converter
- 3 BlowA water-cooled lance jets pure oxygen onto the melt
- 4 SlagLime takes up silicon, phosphorus and other impurities
- 5 TapThe converter tilts and pours out crude steel
- 6 CastingThe steel is refined further and cast into slabs or billets