Basic oxygen steelmaking: Materials
Materials it needs
The commodities and chemicals it needs per unit, its share of each one's demand and how critical each is
Processes- Fe Iron ore criticality low The whole blast furnace and converter route uses on average 1,400 kg of iron ore per tonne of crude steel [3]; ore is mined in many countries.
- Kc Coking coal criticality medium The route uses on average 800 kg of coal per tonne of steel, mostly as coke in the blast furnace [3]; the EU lists coking coal as a critical raw material [8].
- CaO Lime criticality low Lime forms the slag that removes impurities; the route uses on average 300 kg of limestone per tonne [3].
- St Steel criticality low Scrap is added to cool the melt: about 30% at most, and 120 kg per tonne on average for the route [3].
- O2 Oxygen criticality low Pure oxygen, separated from liquefied air next to the steelworks, is the reagent that names the process [1][7].
- CO2 Carbon dioxide criticality low Carbon burnt out of the iron leaves as carbon monoxide gas, which is burnt to carbon dioxide.
as of 2026-11-11. The amounts are for the whole blast furnace and converter route, not the converter alone [3]; criticality is the writer's judgement from the EU list and supply spread.
Critical materials
The materials whose supply could hold it back
- Coking coal: the blast furnace that feeds the converter uses about 800 kg of coal per tonne of steel [3], and the EU lists coking coal as a critical raw material, on its fifth list of 2023 [8].
- Scrap supply limits nothing here, since a converter can use only about 30% scrap [3]; that cap is also why the route still needs fresh iron.
as of 2026-11-11
Sources
- The History of LD Steelmaking: Back to the Roots Primetals Technologies, Metals Magazine, 2016
- Fact sheet: Steel and raw materials World Steel Association (copy hosted by Australian Steel Institute), 2018
- Carl von Linde Science History Institute
- Study on the Critical Raw Materials for the EU 2023 European Commission, 2023