Basic oxygen steelmaking: Evolution
Timeline
The milestones from first idea to today
| Year | Milestone |
|---|---|
| 1947 | Pilot-plant tests of oxygen refining at the Von Roll works in Gerlafingen, Switzerland, after Durrer's laboratory work of 1940 to 1943 [4] |
| 1949 | Trials of top-blowing liquid iron with oxygen begin at the Linz steelworks on 3 June [1] |
| 1952 | The first 30-tonne LD converter starts up in Linz in November [1][5] |
| 1953 | A second LD plant starts at Donawitz, Austria, on 22 May [1] |
| 1956 | An order for LD converters for Rourkela in India takes the process abroad [1] |
| 2025 | Oxygen converters make 69.4% of world crude steel [2] |
as of 2026-11-11
Lineage
The technologies it came from and the ones that came from it
Came before it- Bes Bessemer process The first Linz trials in 1949 used a rebuilt Bessemer converter, and the LD process blows oxygen where Bessemer blew air [1].
- OH Open-hearth steelmaking The basic oxygen furnace replaced the open hearth, which needed 10 to 12 hours a heat against under 40 minutes [1][6].
- BF Blast furnace and cast iron The converter is charged with molten pig iron straight from the blast furnace.
- EAF Electric arc furnace The electric furnace competes with the converter for the same job: in 2025 converters made 69.4% of world crude steel and electric furnaces 30.3% [2].
- H2D Hydrogen direct reduction (green steel) Iron reduced with hydrogen instead of coke can feed electric furnaces, a route meant to replace the coal-based blast furnace and converter.
as of 2026-11-11
Sources
- The History of LD Steelmaking: Back to the Roots Primetals Technologies, Metals Magazine, 2016
- World Steel in Figures 2026 World Steel Association, 2026
- Beitrag zur geschichtlichen Entwicklung des Sauerstoffaufblas-Stahlerzeugungs-Verfahrens CHIMIA 29, p. 510 (Borut Marincek), 1975
- 60 years of the Linz-Donawitz (LD) process voestalpine Steel Division
- Bessemer's Steel Processing Method EBSCO Research Starters (Gary A. Campbell), 2023