Material Insights · Understanding the Material World

Electric arc furnace

An electric arc melts scrap or reduced iron into steel, the basis of recycling steel.

Making materials · Metals · No. 18

  • Second industrial revolution
  • Readiness 9 of 9
  • System
Making materials · Technology

Steel can be made by short-circuiting a heap of scrap: arcs hotter than any flame melt it down, and almost a third of the world's steel is made this way.

Chart: Illustration: Electric arc furnace

Where it comes from

Chart: Map of where it comes from

Paul Héroult built the first industrial arc furnace for steel at La Praz in France. It made steel on 9 October 1900, and the first commercial shipment followed that December.

Three things to know
  1. Héroult's 1900 furnace ran on 110 V and 4,000 A and was the first able to make steel from scrap.
  2. As late as 1939 the arc furnace was still kept for quality and special steels.
  3. In a furnace fed only with scrap, electricity supplies 50 to 70% of the energy.
The journey
  1. 1 ChargeScrap, direct reduced iron or pig iron is loaded
  2. 2 ArcsGraphite electrodes strike arcs that melt the charge
  3. 3 RefiningOxygen and lime remove carbon and impurities into slag
  4. 4 TappingLiquid steel is poured into a ladle
  5. 5 CastingThe steel is cast and rolled into bars, sections and sheet
Covered in From ground to marketCommoditiesUsing energy: food, materials, mobility and buildingsEnergyMatter at the atomic scale: bonds, reactions and process engineeringEngineeringCost, trade-offs and resources: why the best design is rarely the strongestEngineering
Go deeper pick a tab to open it in full