Electric arc furnace: Materials
Materials it needs
The commodities and chemicals it needs per unit, its share of each one's demand and how critical each is
Recovers- St Steel criticality low Scrap is the main feed; more than 80% of steel is eventually recycled [5], and world scrap exports came to 95.3 million t in 2025 [3].
- Fe Iron ore criticality low Ore enters as direct reduced iron; one route uses 70% reduced iron and 30% scrap [4].
- Gr Graphite criticality medium The electrodes are graphite and are slowly consumed as the furnace runs.
- CaO Lime criticality low Lime makes the slag that takes up impurities.
- O2 Oxygen criticality low Oxygen is blown in to burn off carbon and speed melting.
as of 2026-11-11. No source opened gives amounts per tonne of steel; criticality is the writer's judgement.
Critical materials
The materials whose supply could hold it back
- Scrap: supply is limited by how much old steel comes back, so countries with little scrap make most of their steel from ore; China made only 10.6% of its steel in electric furnaces in 2025 [3].
- Graphite electrodes: they are consumed in use and are made from synthetic graphite, a specialised product.
- Electricity: the furnace needs a large, steady supply, 50 to 70% of its energy in an all-scrap furnace [4], so power prices and grid capacity limit where it can run.
as of 2026-11-11
Sources
- World Steel in Figures 2026 World Steel Association, 2026
- Energy use in the steel industry (fact sheet) World Steel Association, 2025
- Steel MIT Climate Portal (Antoine Allanore and Aaron Krol), 2024