Material Insights · Understanding the Material World

Bessemer process

Air blown through molten iron burns off carbon, making cheap steel in bulk for the first time.

Making materials · Metals · No. 15

  • Steam and steel
  • Readiness 9 of 9
  • Process
Making materials · Technology

Blowing cold air through molten iron sounds like a way to cool it; instead it boils, roars and turns into steel in 20 minutes.

Chart: Illustration: Bessemer process

Where it comes from

Chart: Map of where it comes from

The inventor Henry Bessemer began in January 1855 to look for a way to make steel in bulk by blowing air through molten iron. He announced the process at Cheltenham in 1856.

Three things to know
  1. The process needs no fuel: burning the carbon in the iron heats the melt and keeps it molten.
  2. Early Bessemer steel was spoilt by leftover oxygen and by phosphorus; Mushet's spiegeleisen fix of 1856 and Thomas's basic lining of 1878 solved them.
  3. Licensing the process earned Bessemer more than one million pounds in royalties alone.
The journey
  1. 1 Pig ironMolten iron from the blast furnace, full of carbon and silicon
  2. 2 ConverterThe iron is poured into a tilting, egg-shaped vessel
  3. 3 BlowAir is forced up through the melt and burns out the impurities
  4. 4 RecarburisingSpiegeleisen adds back carbon and manganese in the right amount
  5. 5 SteelThe steel is poured into ingots for rails, plates and beams
Covered in Matter at the atomic scale: bonds, reactions and process engineeringEngineering
Go deeper pick a tab to open it in full