Bessemer process: Overview
What it does
The job the technology does for people, in a short paragraph
The Bessemer process turns molten pig iron into steel by blowing air through it [1]. Patented in 1855 [2], it was the first way to make steel cheaply in bulk, cutting its cost from about £40 to £6 or £7 a long ton [1]. It supplied the rails and beams of the late 19th century until open hearth furnaces and then oxygen converters replaced it [1].
as of 2026-11-10
How it works
The working principle in plain words, step by step
Molten pig iron, which holds several per cent of carbon plus silicon and other impurities, is poured into a large tilting vessel called a converter. Air is blown in through holes in the bottom and bubbles up through the metal. The oxygen in the air burns the silicon and carbon, and that burning releases enough heat to keep the iron molten and even hotter [1], so no fuel is needed. A blow took about 10 to 20 minutes [1]. The blow leaves too little carbon and some dissolved oxygen, so spiegeleisen, an iron rich in manganese, is added to restore the carbon and remove the oxygen [1]. In the basic version, a lining of dolomite or limestone also removes phosphorus [1].
as of 2026-11-10
Key figures
The handful of numbers that size it up, each with its unit, year and source
| Figure | Value | Unit | Year | Source |
|---|---|---|---|---|
| Cost of steel before the Bessemer process | 40 | GBP per long ton | 1855 | [1] |
| Cost of steel with the Bessemer process, low end | 6 | GBP per long ton | – | [1] |
| Time to convert 3 to 5 t of iron | 20 | minutes, at most | – | [1] |
| Batch (heat) a converter could treat, upper end | 30 | t | – | [1] |
| US steel output | 26 | million tons | 1910 | [1] |
as of 2026-11-10. The source gives a fall from £40 to £6 or £7 per long ton [1]; the year 1855 marks the time before the process. The 1910 output is in tons as the source gives it, not converted.
Where it is used
The main places and products the technology is found in
- Steel rails for the railways of the late 19th century [1]
- Structural steel for bridges and early skyscrapers
- Plates and wire for ships and machines
- Cheap construction steel in Germany, made by the basic process, into the 1950s and 1960s [1]
as of 2026-11-10
Scale today
How much of it there is now: units in use, made each year and who uses it
- Installed
- None in commercial use; in the United States Bessemer steelmaking stopped in 1968 [1]
- Unit
- converters
- Year
- 1968
- Note
- Its successor, the oxygen converter, made 69.4% of crude steel in 2025, in countries making about 100% of world output [5].
as of 2026-11-10
Sources
- Wikipedia: Bessemer process
- Bessemer's Steel Processing Method EBSCO Research Starters (Gary A. Campbell), 2023
- World Steel in Figures 2026 World Steel Association, 2026